| 引用本文: | 李杰,孙海洋.关于S147 铝合金形变时效强化研究.[J].国防科技大学学报,1988,10(3):33-38 ，110.[点击复制] |
| Li Jie,Sun Haiyang.A Study on Strengthening of S147 Aluminum Alloy by Deformation Aging[J].Journal of National University of Defense Technology,1988,10(3):33-38 ，110[点击复制] |
|
| |
|
|
| 本文已被：浏览 5372次 下载 5704次 |
| 关于S147 铝合金形变时效强化研究 |
| 李杰, 孙海洋 |
|
(材料科学与应用化学系)
|
| 摘要: |
| 本文研究了S147铝合金板材在形变时效处理各工艺阶段中的组织与性能。用扫描电镜观察分析了材料的断口形貌，并用薄膜试样在透射电镜下分析研究了该合金形变时效处理后的微观亚结构及过渡相析出物特征。结果表明，最佳形变时效处理可显著提高S147铝合金的强度及塑韧性，并能改善其过渡相析出过程及特征。 |
| 关键词: 铝合金，形变时效 |
| DOI： |
| 投稿日期：1988-01-05 |
| 基金项目: |
|
| A Study on Strengthening of S147 Aluminum Alloy by Deformation Aging |
| Li Jie, Sun Haiyang |
|
(Department of Materials Science and Applied Chemistry)
|
| Abstract: |
| The microstructure and the properties of S147 aluminum alloy plate at each stage of deformation aging have been studied. The fracture aspects of the material have been analyzed and examined with a SEM. The microstructures and features of transition phase precipitates of S147 aluminum alloy after deformation aging have been analyzed and investigated with thin foil Specimens by TEM. The results show that the optimun deformation aging Can greatly increase the strength，plasticity and toughness of S147 aluminum
alloy，and improve the feature and process of trousition phase precipitates. |
| Keywords: Aluminum alloy,Deformation aging |
|
|
