| 引用本文: | 呉凡,堵永国,魏克泰,等.高强度热处理双相钢制绳线材研制.[J].国防科技大学学报,1990,12(1):97-102.[点击复制] |
| Wu Fan,Du Yongguo,Wei Ketai,et al.Development of Heat Treating Dual Phase Roping Steel Wire with High Strength[J].Journal of National University of Defense Technology,1990,12(1):97-102[点击复制] |
|
| |
|
|
| 本文已被：浏览 6101次 下载 5738次 |
| 高强度热处理双相钢制绳线材研制 |
| 呉凡, 堵永国, 魏克泰, 马鸣图, 盛芬 |
|
(材料科学与应用化学系)
|
| 摘要: |
| 本文通过实验提出了一种双相钢制绳线材的热处理工艺程序，即：奥氏体化及水淬以获得全部马氏体组织→临界间加热淬火以获双相组织并回火→酸洗磷化后多道次连续冷拔至终尺寸→入工时效。按此程序生产的线材σb可达1800MPa以上，且扭转、弯曲疲劳性能超过标准规定值。 |
| 关键词: 线材，双相钢 |
| DOI： |
| 投稿日期：1988-12-13 |
| 基金项目: |
|
| Development of Heat Treating Dual Phase Roping Steel Wire with High Strength |
| Wu Fan, Du Yongguo, Wei Ketai, Ma Mingtu, Sheng Fen |
|
(Department of Materials Science and Applied Chemistry)
|
| Abstract: |
| Based on the experiments，the heat treating technology process for the dual phase roping steel wire is suggested as follows： austenization and water quenching for full martensite structure→critical annealing and quenching for dual phase structure followed by tempering→after acid pickling and phosphorisation，continuous cold drawing multisteps until expected end dimension of the wire→artificial aging for stress relief.
According to the production process，the tensile strength of the wire may be achieved over 1800 MPa while the anti-torsion and bending fatique properties can exceed the value stipulated in the National Standard. |
| Keywords: wire,dual phase steel |
|
|
|
|
|
