| 引用本文: | 潘进,赵恂,尹新方,等.SiC(Ti)纤维与铝的相容性及预制丝性能的研究.[J].国防科技大学学报,1993,15(3):38-42.[点击复制] |
| Pan Jin,Zhao Xun,Yin Xinfang,et al.Study on the Compatibility of SiC(Ti) Fiber VS Aluminium and the Properties of Preform Wire[J].Journal of National University of Defense Technology,1993,15(3):38-42[点击复制] |
|
| |
|
|
| 本文已被：浏览 6328次 下载 1067次 |
| SiC(Ti)纤维与铝的相容性及预制丝性能的研究 |
| 潘进, 赵恂, 尹新方, 杨德明 |
|
(材料工程与应用化学系)
|
| 摘要: |
| 本文利用纤维测强法研究了镀铝 SiC（Ti) 纤维经不同规范热处理后的抗拉强度变化规律，探讨了 SiC（Ti)纤维与铝的相容性。采用超声液相浸渗法成功地制备出 SiC (Ti)/Al 预制丝。预制丝强度及其萃取纤维强度试验和金相、扫描电镜观察等结果表明，该纤维在所定的工艺条件下强度降级甚小，纤维与铝之间的结合良好，所制出的预制丝强度达到 ROM 预测值。 |
| 关键词: 含钛碳化硅纤维，超声液相浸渗，预制丝，抗拉强度 |
| DOI： |
| 投稿日期：1993-03-05 |
| 基金项目: |
|
| Study on the Compatibility of SiC(Ti) Fiber VS Aluminium and the Properties of Preform Wire |
| Pan Jin, Zhao Xun, Yin Xinfang, Yang Deming |
|
(Department of Material engineering and Applied Chemistry)
|
| Abstract: |
| The regularity of the tensile strength of SiC(Ti) fiber coated aluminium and heated at various conditions was investigated，by means of fiber strength testing method. By using an ultrasonic liquid infiltration processing, SiC(Ti)/Al preform wire was prepared successfully. The experiment results of fiber and preform wire strength testing，metal1ographic analysis and SEM observation showed that SiC (Ti) fiber had a good stability，and the wire strength came up to the ROM calculated level. |
| Keywords: tensile strength,SiC fiber containing Ti,ultrasonic liquid infiltration,preform wire |
|
|
|
|
|
