| 引用本文: | 范大鹏,陈日曜.精密加工过程切削用量和表面粗糙度关系的模糊化处理方法.[J].国防科技大学学报,1995,17(4):92-96.[点击复制] |
| Fan Dapeng,Chen Riyao.Research on the Relation between Cutting Parameters and Surface Roughness with Fuzzy Processing Technique[J].Journal of National University of Defense Technology,1995,17(4):92-96[点击复制] |
|
| |
|
|
| 本文已被：浏览 5960次 下载 928次 |
| 精密加工过程切削用量和表面粗糙度关系的模糊化处理方法 |
| 范大鹏1, 陈日曜2 |
|
(1.国防科技大学 湖南 长沙 410073;2.华中理工大学 武汉 430074)
|
| 摘要: |
| 在金属切削原理中，用切削用量可以估计理论表面粗糙度。由于切削过程的复杂性，实际加工表面粗糙度和理论表面粗糙度有较大差距。本文采用模糊模式识别方法，对切削用量和表面粗糙度的关系进行了实验研究。本人介绍的理论方法、实现技术路线和实验结果，为以后开展FMS或CIMS中智能化质量监控技术的进一步研究打下了基础。 |
| 关键词: 表面粗糙度 切削参数 分析 模糊识别 |
| DOI： |
| 投稿日期：1995-05-07 |
| 基金项目:国家自然科学基金资助项目 |
|
| Research on the Relation between Cutting Parameters and Surface Roughness with Fuzzy Processing Technique |
| Fan Dapeng1, Chen Riyao2 |
|
(1.National University of Defense Technology;2.Huazhong University of Science and Technology)
|
| Abstract: |
| Upon metal cutting theory, theorectical surface roughness may be determined by cutting parameters. But owing to the complexity of cutting process, there is difference between practical and theoretical surface roughness. In this paper，a Fuzzy pattern recognition technique is presented to analyse the relation between the cutting parameters and surface roughness. The principle，method and experiment results are illustrated respectively. |
| Keywords: surface roughness,cutting parameters,analysing,Fuzzy pattern recognition |
|
|
