| 引用本文: | 范大鹏,尹自强,杨毅.精密异形航空燃气涡轮轴承加工关键技术研究.[J].国防科技大学学报,1997,19(1):9-13.[点击复制] |
| Fan Dapeng,Yin Ziqiang,Yang Yi.Research on the Key Machining Technology of Prceision Non-circular Bearings of the Aero Gas Turbine Engine[J].Journal of National University of Defense Technology,1997,19(1):9-13[点击复制] |
|
| |
|
|
| 本文已被：浏览 6726次 下载 6029次 |
| 精密异形航空燃气涡轮轴承加工关键技术研究 |
| 范大鹏1, 尹自强1, 杨毅2 |
|
(1.国防科技大学;2.湘潭机电高等专科学校)
|
| 摘要: |
| 异形燃气涡轮轴承的外环滚道截面形状为波瓣形, 精度要求很高。本文采用的微位移进给驱动机构具有高频响、高精度、大行程, 且控制简便的特点。在研究陶瓷结合剂CBN 砂轮修整及磨削工艺的基础上, 采用前馈与速度反馈的控制方法, 对工件进行了加工, 得到了较好的加工表面质量和滚道轮廓曲线。 |
| 关键词: 轴承, 直线电机, CBN 砂轮, 磨削 |
| DOI： |
| 投稿日期：1996-05-28 |
| 基金项目: |
|
| Research on the Key Machining Technology of Prceision Non-circular Bearings of the Aero Gas Turbine Engine |
| Fan Dapeng1, Yin Ziqiang1, Yang Yi2 |
|
(1.Department of Machtronics Engineering and Instrumentation, NUDT, Changsha, 410073;2.Xiangtan Iastitute of Machinery Electricity)
|
| Abstract: |
| For high speed roller bearings used in aircraft engine, the roller's slipping is one of the main causes which result in bearing damage. A kind of new roller bearings having non circular inner race is proved to be a valid method to solve the slipping problem. In this paper, a strategy to grinding the trilobed inner race by using linear motor control technique is presented and illustrated. Practical machining experiment has been made and machining results are satisfactory. |
| Keywords: bearings, linear motor, CBN wheels, grinding |
|
|
|
|
|
