| 引用本文: | 王金娥,戴一帆,张学成.基于COM的开放式数控系统软件模块通信方法的研究.[J].国防科技大学学报,2002,24(5):49-52.[点击复制] |
| WANG Jine,DAI Yifan,ZHANG Xuecheng.Research of the Communication Methods Between Modules of Open CNC System's Software Based on COM[J].Journal of National University of Defense Technology,2002,24(5):49-52[点击复制] |
|
| |
|
|
| 本文已被：浏览 6521次 下载 6251次 |
| 基于COM的开放式数控系统软件模块通信方法的研究 |
| 王金娥, 戴一帆, 张学成 |
|
(国防科技大学 机电工程与自动化学院，湖南 长沙 410073)
|
| 摘要: |
| 采用基于COM技术的软件设计方法，对数控系统软件进行模块化开发，模块间的通信问题是关键。应用COM技术中的“事件”和“事件槽”方式实现了客户组件模块与服务器之间、客户组件模块之间的通信。这为开放式数控系统软件设计中通信问题的解决提供了一种新的软件方法。 |
| 关键词: 开放式数控系统 接口 通信 模块化 |
| DOI： |
| 投稿日期：2002-06-03 |
| 基金项目: |
|
| Research of the Communication Methods Between Modules of Open CNC System's Software Based on COM |
| WANG Jine, DAI Yifan, ZHANG Xuecheng |
|
(College of Mechatronics Engineering and Automation,National Univ. of Defense Technology,Changsha 410073,China)
|
| Abstract: |
| Methods of software design based on COM are used to modularize the CNC systems and the crux is communication. “Event” and “Event slot ” are used to realize the communication between different client component modules and between client and sever. It provides a new software method of the solution to the communication problem of open CNC system. |
| Keywords: open CNC system interface communication modularization |
|
|
