| 引用本文: | 尚建忠,唐力,孟凡磊,等.基于并发式检测时序的几何级冲突检测策略研究.[J].国防科技大学学报,2004,26(5):90-93 ,108.[点击复制] |
| SHANG Jianzhong,TANG Li,MENG Fanlei,et al.Research on the Strategy of Geometry Level Conflict Detection Based on the Concurrent Timing Sequence[J].Journal of National University of Defense Technology,2004,26(5):90-93 ,108[点击复制] |
|
| |
|
|
| 本文已被：浏览 7425次 下载 5735次 |
| 基于并发式检测时序的几何级冲突检测策略研究 |
| 尚建忠, 唐力, 孟凡磊, 罗自荣 |
|
(国防科技大学 机电工程与自动化学院，湖南 长沙 410073)
|
| 摘要: |
| 以三维CAD实时协同设计为背景，深入研究了实时协同设计中的数据冲突检测问题，提出了三维实时协同设计中的数据冲突本质上就是实体特征冲突的思想。在此基础上，探讨了基于特征的冲突检测方法，并针对其不足之处，提出了一种可行性较高的几何级冲突检测策略及其相应的检测时序方案，研究了其冲突检测数据结构、冲突检测规则。此冲突检测思想在PTC公司的Pro/Engineer平台上进行了算法验证，取得了较好的冲突检测效果。 |
| 关键词: 协同设计 特征 冲突检测 CAD |
| DOI： |
| 投稿日期：2004-04-29 |
| 基金项目:国家部委资助项目(41318.1.1.3) |
|
| Research on the Strategy of Geometry Level Conflict Detection Based on the Concurrent Timing Sequence |
| SHANG Jianzhong, TANG Li, MENG Fanlei, LUO Zirong |
|
(College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| With the background of collaborative 3D-CAD design, the paper probes into the detection of the conflict in the real-time collaborative design, and presents an idea that data confliction in real-time collaborative 3D design is entity feature confliction. According to this idea, the paper discusses the conflict detection methods based on feature. By analyzing the shortcomings of the methods, the paper provides a geometry level conflict detection strategy with higher feasibility as well as its timing sequence scheme. The conflict detection data structure and conflict detection rules are also studied. This conflict detection idea has been validated in the Pro/ENGINEER platform of PTC Corporation and a better conflict detection result is achieved. |
| Keywords: collaborative design feature conflict detection CAD |
|
|
|
|
|
