引用本文: | 袁成卫,刘庆想,钟辉煌.同轴插板式模式转换器反射特性.[J].国防科技大学学报,2005,27(5):121-125.[点击复制] |
YUAN Chengwei,LIU Qingxiang,ZHONG Huihuang.The Reflective Characteristics of the Coaxial Plate-inserted Mode Converter[J].Journal of National University of Defense Technology,2005,27(5):121-125[点击复制] |
|
|
|
本文已被:浏览 6689次 下载 6161次 |
同轴插板式模式转换器反射特性 |
袁成卫1, 刘庆想2, 钟辉煌1 |
(1.国防科技大学 光电科学与工程学院,湖南 长沙 410073;2.西南交通大学 理学院,四川 成都 610031)
|
摘要: |
同轴插板式模式转换器是一种新型高功率微波TEM-TE11模式转换器。回顾了模式转换器中的模式转换过程,通过分析不同模式转换过程中波导不连续性结构的反射特性,得到了模式转换器总的反射特性。指出不连续性结构将在输入口形成同轴TEM和同轴TE11反射模;通过选择模式转换器的内外径尺寸可以消除TE11反射模;通过在输入口引入匹配金属杆和合理设计内导体末端锥体结构可以减小TEM反射模。 |
关键词: 模式转换器 高功率微波 反射特性 |
DOI: |
投稿日期:2005-03-28 |
基金项目:国家863计划资助项目 |
|
The Reflective Characteristics of the Coaxial Plate-inserted Mode Converter |
YUAN Chengwei1, LIU Qingxiang2, ZHONG Huihuang1 |
(1.College of Opto-electronic Science and Engineering, National Univ. of Defense Technology, Changsha 410073, China;2.College of Science, Southwest Jiaotong University, Chengdu 610031, China)
|
Abstract: |
The coaxial plate-inserted mode converter is a novel high-power microwave TEM-TE11mode converter. The mode conversion processes of the mode converter were reviewed, and the reflective characteristics were studied by analyzing the waveguide discontinuousness. It is revealed that, the reflection modes of the mode converter are TEM mode and TE11mode, the reflection TE11 mode can be canceled by choosing the right radii of the coaxial waveguide, and the reflection TEM mode can be diminished by setting matching poles and properly designing the cone at the end of inner conductor. |
Keywords: mode converter high-power microwave (HPM) reflection characteristics |
|
|
|
|
|