引用本文: | 周勇为.超声速静风洞设计和流场校侧[J].国防科技大学学报,2005,27(6):5-8 ,92.[点击复制] |
ZHOU Yongwei.The Aerodynamic and Structural Design of Supersonic Quiet Wind Tunnel[J].Journal of National University of Defense Technology,2005,27(6):5-8 ,92[点击复制] |
|
|
|
本文已被:浏览 6464次 下载 5690次 |
超声速静风洞设计和流场校侧 |
周勇为 |
(国防科技大学 航天与材料工程学院,湖南 长沙 410073)
|
摘要: |
论述了静风洞概念并设计和建立了一座小型静风洞SQWT-120。SQWT-120的设计马赫数为4.0,喷管出口直径为120mm,Re=0.46~1.78×107,运行时间为6~60s。测量结果表明,喷管出口马赫数为3.8,在x从160~438mm一段轴向距离内,ΔM/M≯±1.2%。在P0=0.4MPa,喷管出口6cm处,静压脉动值不超出0.1%,风洞工作时间15s,具备静风洞试验能力。 |
关键词: 超声速 静风洞 设计 校侧 |
DOI: |
投稿日期:2005-07-01 |
基金项目:国防预研基金资助项目(97J13.1.3KG0145) |
|
The Aerodynamic and Structural Design of Supersonic Quiet Wind Tunnel |
ZHOU Yongwei |
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology,Changsha 410073,China)
|
Abstract: |
A basic idea of a quiet wind tunnel is described. A supersonic quiet wind tunnel(SQWT-120) is designed and built. SQWT-120 designed Mach number is 4.0, the nozzle outlet diameter is 120mm, Re is 0.46~1.78×107and the operation duration is 6-60 seconds. The conclusions of calibrations demonstrate the actual flow Mach number is 3.8, ΔM/M is ≯±1.2% between x=160mm and x=438mm. The unsteady pressure disturbances are not larger than 0.1% before x=450mm, the operation time is 15s. The results show that the wind tunnel can be used to study the steady flow and unsteady flow. |
Keywords: supersonic quiet tunnel design calibrations |
|
|