| 引用本文: | 吴宝中,龚京忠,李国喜,等.面向工序能力的制造装备重构.[J].国防科技大学学报,2007,29(1):100-105.[点击复制] |
| WU Baozhong,GONG Jingzhong,LI Guoxi,et al.Manufacturing Equipment Reconfiguration Facing to Process Capability[J].Journal of National University of Defense Technology,2007,29(1):100-105[点击复制] |
|
| |
|
|
| 本文已被：浏览 7003次 下载 5758次 |
| 面向工序能力的制造装备重构 |
| 吴宝中, 龚京忠, 李国喜, 郭米娜 |
|
(国防科技大学 机电工程与自动化学院，湖南 长沙 410073)
|
| 摘要: |
| 为提高制造系统的快速响应能力，分析了面向可重构的制造机床模块化设计方法，提出了面向工序能力的制造机床重构的总体思路，重点从能力相似度计算、相关性分析、缺少能力参数的模块重构、冗余能力参数模块重构、能力比较、模块替换、能力验证等方面研究了基于模块的机床重构算法。通过加工中心的配置与重构对算法进行了验证，结果表明，该算法是可行和有效的。 |
| 关键词: 制造装备 工序能力 模块 重构 算法 |
| DOI： |
| 投稿日期：2006-07-31 |
| 基金项目:国家部委资助项目(51318010407) |
|
| Manufacturing Equipment Reconfiguration Facing to Process Capability |
| WU Baozhong, GONG Jingzhong, LI Guoxi, GUO Mina |
|
(College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| To enhance the rapid response ability of manufacturing system, the machine tools' modular design oriented to reconfiguration was analyzed. Then the general idea of machine tools' reconfiguration oriented to process-capability was presented. The machine tools' reconfiguration arithmetic based on modularization was researched mostly in such aspects as ability similarity account, relativity analysis, module reconfiguration of lacking ability parameter, module reconfiguration of redundancy ability parameter, ability comparing, module displacing and ability checking up. The arithmetic was validated by the configuration and reconfiguration of machining center, which indicates the arithmetic is feasible and effective. |
| Keywords: manufacturing equipment process capability module reconfiguration arithmetic |
|
|
|
|
|
