| 引用本文: | 阳世清,徐松林,张彤.PTFE/Al反应材料制备工艺及性能.[J].国防科技大学学报,2008,30(6):39-42,62.[点击复制] |
| YANG Shiqing,XU Songlin,ZHANG Tong.Preparation and Performance of PTEF/Al Reactive Materials[J].Journal of National University of Defense Technology,2008,30(6):39-42,62[点击复制] |
|
| |
|
|
| 本文已被：浏览 8438次 下载 6375次 |
| PTFE/Al反应材料制备工艺及性能 |
| 阳世清, 徐松林, 张彤 |
|
(国防科技大学 航天与材料工程学院，湖南 长沙 410073)
|
| 摘要: |
| 氟聚物基反应材料是一种主要由氟聚物和金属填料组成的亚稳态含能复合材料，也是近年来国外研究报道较多的一种新型含能材料。采用冷压、热烧结法制备了PTFE/Al反应材料，测试了其理化性能、热分解性能和力学性能，在此基础上，进一步研究了压制成型和烧结工艺参数。 |
| 关键词: 反应材料 PTFE Al 制备 性能 |
| DOI： |
| 投稿日期：2008-06-24 |
| 基金项目: |
|
| Preparation and Performance of PTEF/Al Reactive Materials |
| YANG Shiqing, XU Songlin, ZHANG Tong |
|
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| The fluoropolymer-based reactive material is a kind of sub-stable energetic composites which contain metal powders, fluoropolymer and fillings. It is also a new kind of energetic material widely reported in recent years. In this paper, the PTFE/Al reactive material was prepared by using the cold press and hot sinter method. The physicochemical performance and mechanical property of PTFE/Al were studied, and the pressing and sintering technical parameters were optimized. |
| Keywords: reactive materials PTFE Al preparation performance |
|
|
|
|
|
