引用本文: | 王洪磊,周新贵,于海蛟,等.烧结助剂对碳纳米管增强氮化铝陶瓷结构与性能的影响[J].国防科技大学学报,2009,31(4):131-133 ,140.[点击复制] |
WANG Honglei,ZHOU Xingui,YU Haijiao,et al.Effect of Sintering Aids on Microstructure and Properties of CNTs/AlN Ceramics[J].Journal of National University of Defense Technology,2009,31(4):131-133 ,140[点击复制] |
|
|
|
本文已被:浏览 6874次 下载 5523次 |
烧结助剂对碳纳米管增强氮化铝陶瓷结构与性能的影响 |
王洪磊, 周新贵, 于海蛟, 赵爽, 罗征 |
(国防科技大学 航天与材料工程学院,湖南 长沙 410073)
|
摘要: |
采用热压烧结工艺制备了碳纳米管增强氮化铝陶瓷,研究了烧结助剂种类、含量对碳纳米管增强氮化铝陶瓷性能及结构的影响。利用XRD、SEM和TEM等分析测试手段对其相组成,断口形貌和微观结构进行了分析。结果表明,烧结助剂Y2O3+CaF2较YF3+CaF2更能促进碳纳米管增强氮化铝陶瓷致密化,但随烧结助剂Y2O3+CaF2含量的增,碳纳米管增强氮化铝陶瓷致密度提高,而力学、导热性能下降。 |
关键词: 碳纳米管 氮化铝 烧结助剂 热压烧结 |
DOI: |
投稿日期:2009-01-08 |
基金项目:国家自然科学基金资助项目(50672128) |
|
Effect of Sintering Aids on Microstructure and Properties of CNTs/AlN Ceramics |
WANG Honglei, ZHOU Xingui, YU Haijiao, ZHAO Shuang, LUO Zheng |
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
Abstract: |
CNTs/AlN ceramics were fabricated by hot-pressure sintering, and the effect of sintering aids kinds, contents on the microstructure and properties of CNTs/AlN ceramics was investigated. The phase constitution, fracture morphology and microstructure were analyzed by XRD, SEM and TEM. The result shows that sintering aids (Y2O3+CaF2) were more efficient for the densification of CNTs/AlN ceramics than sintering aids (YF3+CaF2). As the contents of sintering aids (Y2O3+CaF2) increased, the density of CNTs/AlN ceramics improved, while the properties of mechanics and thermal-conductivity decreased. |
Keywords: CNTs AlN sintering aids hot-pressure sintering |
|
|
|
|
|