引用本文: | 王德全,夏智勋,胡建新.固冲发动机补燃室凝相碳颗粒燃烧研究[J].国防科技大学学报,2010,32(3):37-41.[点击复制] |
WANG Dequan,XIA Zhixun,HU Jianxin.Combustion Study of Condensed Carbon Particle in the Secondary Combustion Chamber of Solid Rocket Ramjet[J].Journal of National University of Defense Technology,2010,32(3):37-41[点击复制] |
|
|
|
本文已被:浏览 6630次 下载 5347次 |
固冲发动机补燃室凝相碳颗粒燃烧研究 |
王德全, 夏智勋, 胡建新 |
(国防科技大学 航天与材料工程学院,湖南 长沙 410073)
|
摘要: |
应用改进的移动火焰锋面(MFF)模型,分析了环境压力、温度等参数对碳颗粒燃烧过程的影响。在此基础上,研究了固冲发动机补燃室内碳颗粒的燃烧过程,得到了固冲补燃室环境中的碳颗粒燃烧特性,并通过固冲直连式试验验证了数值模拟结果。结果表明:补燃室中大部分碳颗粒在进气道出口附近燃烧。 |
关键词: 固体火箭冲压发动机 燃烧 数值模拟 碳颗粒 两相流 |
DOI: |
投稿日期:2009-12-03 |
基金项目: |
|
Combustion Study of Condensed Carbon Particle in the Secondary Combustion Chamber of Solid Rocket Ramjet |
WANG Dequan, XIA Zhixun, HU Jianxin |
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
Abstract: |
The effect of pressure and temperature on carbon particle combustion was studied by an improved Moving Flame Front (MFF) model. On the basis of the above discussion, the carbon particle combustion in solid rocket ramjet was analyzed. As a result, the carbon particle combustion mechanism in solid rocket ramjet was achieved. Moreover, numerical results were validated by direct-connect test of solid rocket ramjet. The result shows that most of carbon particle in the secondary combustion chamber burned near the inlet exit. |
Keywords: solid rocket ramjet combustion numerical simulation carbon particle two phase flow |
|
|