引用本文: | 薛建锋,沈培辉,王晓鸣.基于层裂机理的弹体侵彻混凝土的工程模型[J].国防科技大学学报,2017,39(3):194-200.[点击复制] |
XUE Jianfeng,SHEN Peihui,WANG Xiaoming.Engineering model of projectile penetrating into concrete based on splitting mechanism[J].Journal of National University of Defense Technology,2017,39(3):194-200[点击复制] |
|
|
|
本文已被:浏览 7226次 下载 5952次 |
基于层裂机理的弹体侵彻混凝土的工程模型 |
薛建锋1,2, 沈培辉1, 王晓鸣1 |
(1. 南京理工大学 智能弹药技术国防重点学科实验室, 江苏 南京 210094;2.
2. 中航工业洪都660所, 江西 南昌 330024)
|
摘要: |
以斜侵彻过程中的终点弹道为研究对象,基于动态球形空腔膨胀理论给出的阻力函数理论公式和开坑阶段的表面层裂机理,建立了能够综合考虑弹头形状、开坑区深度的斜侵彻深度预测模型,并进一步推导了能够适用不同弹头形状的弹体过载时程曲线计算公式。预测模型得到的侵彻深度和过载与试验结果吻合较好。研究结果可为弹体与混凝土靶的斜侵彻弹道分析和弹丸头部设计提供一定帮助。 |
关键词: 爆炸力学 层裂机理 终点弹道 侵彻深度 过载 |
DOI:10.11887/j.cn.201703029 |
投稿日期:2016-01-27 |
基金项目:国家重点基础研究发展计划资助项目(613143020301) |
|
Engineering model of projectile penetrating into concrete based on splitting mechanism |
XUE Jianfeng1,2, SHEN Peihui1, WANG Xiaoming1 |
(1. ZNDY Ministerial Key Laboratory, Nanjing University of Science and Technology, Nanjing 210094, China;2.
2. 660 Design Institute of Hong Du AVIC, Nanchang 330024, China)
|
Abstract: |
Based on the theoretical resistance function from dynamic spherical cavity expansion model and the surface splitting mechanism, a prediction model was proposed for oblique penetration depth of rigid projectiles into concrete targets. In the proposed formula, the dimensionless coefficients denoting the projectile nose geometry were introduced to consider the variation of projectile nose geometry and the cratering depth. A prediction model for the deceleration time history of the projectile with different nose geometries was obtained. The penetration depths and overload curve of the model were in good agreement with the test results. The research results can provide some help for the oblique penetration trajectory analysis and the design of the projectile head. |
Keywords: explosion mechanics splitting mechanism terminal ballistic penetration depth overload |
|
|