关于S147 铝合金形变时效强化研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


A Study on Strengthening of S147 Aluminum Alloy by Deformation Aging
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文研究了S147铝合金板材在形变时效处理各工艺阶段中的组织与性能。用扫描电镜观察分析了材料的断口形貌,并用薄膜试样在透射电镜下分析研究了该合金形变时效处理后的微观亚结构及过渡相析出物特征。结果表明,最佳形变时效处理可显著提高S147铝合金的强度及塑韧性,并能改善其过渡相析出过程及特征。

    Abstract:

    The microstructure and the properties of S147 aluminum alloy plate at each stage of deformation aging have been studied. The fracture aspects of the material have been analyzed and examined with a SEM. The microstructures and features of transition phase precipitates of S147 aluminum alloy after deformation aging have been analyzed and investigated with thin foil Specimens by TEM. The results show that the optimun deformation aging Can greatly increase the strength,plasticity and toughness of S147 aluminum alloy,and improve the feature and process of trousition phase precipitates.

    参考文献
    相似文献
    引证文献
引用本文

李杰,孙海洋.关于S147 铝合金形变时效强化研究[J].国防科技大学学报,1988,10(3):33-38 ,110.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:1988-01-05
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-08-18
  • 出版日期:
文章二维码