采用遗传算法的电控增压器电磁阀优化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51379212); 国家部委基金资助项目(3020401030301); 海军工程大学博士研究生创新基金资助项目(XYBJ1611)


Optimization design of solenoid valve for electric-controlled pressure amplifier using genetic algorithm
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    运用Ansoft Maxwell软件建立电磁阀的动态响应特性仿真模型,并通过试验验证模型的准确性。利用模型集成ISIGHT软件的方法,对影响电磁阀动态响应特性的参数进行灵敏度分析,得出各个参数对动态响应特性的Pareto图。基于遗传算法对电磁阀进行多参数优化设计,获取最佳参数组合,并利用电磁阀动态响应特性试验台架,开展参数优化前后电磁阀动态响应特性的对比试验研究。试验结果表明:相比于原参数方案,参数优化后的电磁阀动态响应特性得到大幅度提升,其开启响应时间缩短了59.1%,关闭响应时间缩短了47.2%。

    Abstract:

    The simulation model of dynamic response characteristics of solenoid valve was established based on Ansoft Maxwell software, and the accuracy of it was verified by experiment. The sensitivity analysis of parameters affecting the dynamic response characteristics of solenoid valve was conducted by the method of integrating ISIGHT with the model, the Pareto of parameters on the dynamic response characteristics was obtained. The multi-parameter optimization design of solenoid valve was carried out based on genetic algorithm, the optimum parameter combination was achieved, and the comparison experimental research of dynamic response characteristics of solenoid valve before and after parameter optimization was conducted by the experimental bench. The result shows that compared with the original parameter scheme, the dynamic response characteristics of solenoid valve after parameter optimization are improved greatly, and the opening and closing response time is reduced by 59.1% and 47.2% respectively.

    参考文献
    相似文献
    引证文献
引用本文

杨昆,刘振明,周磊,等.采用遗传算法的电控增压器电磁阀优化设计. Optimization design of solenoid valve for electric-controlled pressure amplifier using genetic algorithm[J].国防科技大学学报,2019,41(3):56-62.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-03-16
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2019-06-13
  • 出版日期: 2019-06-28
文章二维码