| 引用本文: | 王诚洪.在冲击载荷作用下锰铜压力传感器的压阻特性.[J].国防科技大学学报,1985,(1):47-54.[点击复制] |
| Wang Chenghong.The Piezoresistance Character of Shock-loaded Manganin Stress Gauge[J].Journal of National University of Defense Technology,1985,(1):47-54[点击复制] |
|
| |
|
|
| 本文已被：浏览 5094次 下载 5729次 |
| 在冲击载荷作用下锰铜压力传感器的压阻特性 |
| 王诚洪 |
|
()
|
| 摘要: |
| 本文从实验上确定锰铜压力传感器在 12kb～420kb 压力范围内的标定曲线。
实验中采用空气炮和化爆两种加载手段，锰铜压力传感器是用氟化乙烯丙烯作为粘结剂，聚四氟乙烯作为绝缘层进行热压封装。 |
| 关键词: |
| DOI： |
| 投稿日期：1984-04-25 |
| 基金项目: |
|
| The Piezoresistance Character of Shock-loaded Manganin Stress Gauge |
| Wang Chenghong |
| Abstract: |
| The calibration curve of the manganin stress gauge in the range of 12kb--420kb has been determined experimentally in the paper. The two load techniques of gas-gun and chemical explosion are used in the experiment. The manganin stress gauge is encapsulated by heating and pressing with polytetra-fluoroethylene(PTFE) as the dielectric layer and fluoroethylene propylene (FEP) as the bonding agent. |
| Keywords: |
|
|
