| 引用本文: | 罗飞路,陈棣湘,张玘,等.自由曲面的立体视觉测量与加工一体化研究.[J].国防科技大学学报,1995,17(2):12-18.[点击复制] |
| Luo Feilu,Chen Dixiang,Zhang Qi,et al.A Study of the Integration of Stereo Vision Measurement and Machining of Free Surfaces[J].Journal of National University of Defense Technology,1995,17(2):12-18[点击复制] |
|
| |
|
|
| 本文已被：浏览 6823次 下载 1018次 |
| 自由曲面的立体视觉测量与加工一体化研究 |
| 罗飞路, 陈棣湘, 张玘, 周继伟 |
|
(国防科技大学 机械电子工程与仪器系 湖南 长沙 410073)
|
| 摘要: |
| 对自由曲面的立体视觉测量与加工一体化技术中的图像匹配、曲面造型以及接口设计等问题进行了分析与讨论，并提出了切实可行的解决办法。 |
| 关键词: 测量加工一体化 自由曲面 立体视觉 |
| DOI： |
| 投稿日期：1995-02-15 |
| 基金项目:国防预研基金资助项目 |
|
| A Study of the Integration of Stereo Vision Measurement and Machining of Free Surfaces |
| Luo Feilu, Chen Dixiang, Zhang Qi, Zhou Jiwei |
|
(Department of Mechatronics and Instruments)
|
| Abstract: |
| The technology of measurement and machining of free surfaces is extensively applied to some industries，e. g. automotive industry and aircraft industry. The integration of measurement and machining is effective in automatization，and it is usually based on 3-D CMM. Stereo vision measurement has the advantage of low cost，high flexibility and having no touch with the measured objects. It has great potential for development. This paper makes analysis of some problems in the integration of stereo vision measurement and machining of free surfaces such as image matching，surface modeling and interface design，and presents the solution as well. |
| Keywords: integration of measurement and machining free surfaces stereo vision |
|
|
|
|
|
