引用本文: | 杨拥民,温熙森,胡政.基于状态空间模型的线性模拟电路BIST方法[J].国防科技大学学报,1997,19(4):100-105.[点击复制] |
Yang Yongmin,Wen Xisen,Hu Zheng.A BIST Method for Linear Analog Circuits Based on State Space Model[J].Journal of National University of Defense Technology,1997,19(4):100-105[点击复制] |
|
|
|
本文已被:浏览 6650次 下载 5557次 |
基于状态空间模型的线性模拟电路BIST方法 |
杨拥民, 温熙森, 胡政 |
(国防科技大学 机械电子工程与仪器系 湖南 长沙 410073)
|
摘要: |
本文针对线性模拟电路, 提出了一种基于系统状态变量的BIST 方法。该方法将系统的状态、状态变化率及输入信号进行加权求和, 以此加权和作为系统的故障检测输出。将其值的大小作为判别依据, 可以区分系统的正常与异常状态。此方法具有简单可靠, 故障覆盖率高的特点。 |
关键词: 状态, BIST, 故障检测 |
DOI: |
投稿日期:1997-03-19 |
基金项目:国防预研基金资助项目 |
|
A BIST Method for Linear Analog Circuits Based on State Space Model |
Yang Yongmin, Wen Xisen, Hu Zheng |
(Department of Mechatronics Engineering and Instrumentation, NUDT, Changsha, 410073)
|
Abstract: |
For the linear analog circuits, a BIST method based on the system's state variables is presented. This method adds up the state variables, their variation speed and input signal by weights, uses the sum as the fault detection output of the system. The normal situation and abnormal situation can be distinguished by the magnitude of the output. This method is simple and reliable, and has a high fault coverage. |
Keywords: state, BIST, fault detection |
|
|
|
|
|