| 引用本文: | 邱静,温熙森,胡政.柔性加工设备机电系统的动力学模型与辨识.[J].国防科技大学学报,1998,20(2):31-34.[点击复制] |
| Qiu Jing,Wen Xisen,Hu Zheng.The Dynamic Models and Their Identification of Mechanical-Electronic Systems of the Flexible Machining Device[J].Journal of National University of Defense Technology,1998,20(2):31-34[点击复制] |
|
| |
|
|
| 本文已被：浏览 7531次 下载 6030次 |
| 柔性加工设备机电系统的动力学模型与辨识 |
| 邱静, 温熙森, 胡政 |
|
(国防科技大学 机械电子工程与仪器系 湖南 长沙 410073)
|
| 摘要: |
| 在剖析柔性加工设备机电系统结构、信息传递链等基础上, 建立柔性加工设备机电系统较精确的动力学模型, 并研制相应硬件, 实现实时在线模型参数辨识, 排除变工况与加工过程的时变性对状态监测与故障诊断的影响, 为实现柔性加工环境下多变工况加工过程的实时状态监测、故障诊断与故障预警打下基础。 |
| 关键词: 柔性加工设备, 机电系统, 动力学模型, 状态监测, 故障预警 |
| DOI： |
| 投稿日期：1997-06-26 |
| 基金项目:国防预研基金资助项目 |
|
| The Dynamic Models and Their Identification of Mechanical-Electronic Systems of the Flexible Machining Device |
| Qiu Jing, Wen Xisen, Hu Zheng |
|
(Department of Mechatronic Engineering and Instruments, NUDT Changsha Hunan, 410073)
|
| Abstract: |
| Based on the analysis of the system structure, information flow path of the flexible machining device, we have built up the precise dynamic model of mechanical-electronic systems of the machining center, and developed the hardware to realize the real-time identification of parameters of the models. It is a strong base both for building up a real-time condition monitoring, fault diagnosis and prediction system and for getting rid of the influence of the changeful machining mode and the factor of time-varying in the FMS environments. |
| Keywords: Flexible machining device, Mechanical-electronic system, Dynamic model Condition monitoring, Fault prediction |
|
|
|
|
|
