| 引用本文: | 杨晓辉,王正华,刘仲,等.PVM平台下三维超声速钝头体底部流场的并行数值模拟及其拓扑分析.[J].国防科技大学学报,1998,20(6):4-7.[点击复制] |
| Yang Xiaohui,Wang Zhenghua,Liu Zhong,et al.The Parallel Numerical Simulation of 3-D Supersonic Blunt Body Base Flow in PVM and Flow's Topology Analysis[J].Journal of National University of Defense Technology,1998,20(6):4-7[点击复制] |
|
| |
|
|
| 本文已被：浏览 6893次 下载 5997次 |
| PVM平台下三维超声速钝头体底部流场的并行数值模拟及其拓扑分析 |
| 杨晓辉1, 王正华1, 刘仲1, 王承尧2 |
|
(1.国防科技大学 并行与分布处理国家重点实验室 湖南 长沙 410073;2.国防科技大学 航天技术系 湖南 长沙 410073)
|
| 摘要: |
| 用拼接法划分网格, 并运用基于消息传递的并行软件平台PVM分配计算任务, 实现了较大规模的三维超声速钝头体底部流场的并行数值模拟。结果表明, 底部压强特性与实验符合较好, 流场的拓扑结构合理。 |
| 关键词: PVM平台, 底部流, 拼接网格, 拓扑分析 |
| DOI： |
| 投稿日期：1998-05-20 |
| 基金项目:九五国防预研和国家863项目资助 |
|
| The Parallel Numerical Simulation of 3-D Supersonic Blunt Body Base Flow in PVM and Flow's Topology Analysis |
| Yang Xiaohui1, Wang Zhenghua1, Liu Zhong1, Wang Chengyao2 |
|
(1.National Laboratory for Parallel and Distributed Processing, NUDT, Changsha, 410073;2.Department of Aerospace Technology, NUDT, Changsha, 410073)
|
| Abstract: |
| This paper uses patched grid method to divide grids and parallel software platform PVM based on message-passing to distribute computational task. The large scale parallel numerical simulations of 3-D supersonic blunt body base flow are accomplished. The results show that the pressure characteristics in base are coincident with experimental results and base flow's topological configurations are reasonable. |
| Keywords: PVM platform, base flow, patched grid, topological analysis |
|
|
|
|
|
