| 引用本文: | 唐罗生,李圣怡,刘阳,等.PAI-CAD/CAM 模型及实现技术研究.[J].国防科技大学学报,1998,20(6):83-87.[点击复制] |
| Tang Luosheng,Li Shengyi,LiuYang,et al.Research on Model of PAI-CAD/CAM and Developing Technique[J].Journal of National University of Defense Technology,1998,20(6):83-87[点击复制] |
|
| |
|
|
| 本文已被：浏览 5841次 下载 6138次 |
| PAI-CAD/CAM 模型及实现技术研究 |
| 唐罗生, 李圣怡, 刘阳, 柳卓之 |
|
(国防科技大学 机械电子工程与仪器系 湖南 长沙 410073)
|
| 摘要: |
| 本文根据敏捷制造与动态联盟将制造系统空间扩展到全国乃至全球, 传统的用于产品开发的CAD/CAM系统已无法满足动态联盟条件下的产品开发要求, 必须开发一种新的CAD/CAM系统才能满足这一要求。笔者根据国际CAD/CAM发展趋势, 结合我国具体国情, 在传统的CAD/CAM基础上提出了“PAI-CAD/CAM (Pseudo-Agile Intelligent CAD/CAM)”的新概念, 并建立了一种系统模型, 此外, 文章还对系统的实现技术进行了深入的探讨。 |
| 关键词: 敏捷制造, 虚拟制造, CAD/CAM, PAI-CAD/CAM |
| DOI： |
| 投稿日期：1998-04-06 |
| 基金项目: |
|
| Research on Model of PAI-CAD/CAM and Developing Technique |
| Tang Luosheng, Li Shengyi, LiuYang, Liu Zhuozhi |
|
(Department of Mechatronics Engineering and Instrumentation, NUDT, Changsha, 410073)
|
| Abstract: |
| Due to the appearance of the Agile & Virtual manufacturing and global manufacturing system, the old CAD/CAM system can't be applied to product development of virtual enterprises and a new CAD/CAM system must be developed. According to our national conditions, this paper discusses a new CAD/CAM system-Pseudo-Agile Intelligent CAD/CAM(PAI-CAD/CAM) system. |
| Keywords: agile manufacturing, virtual manufacturing, CAD/CAM, PAI-CAD/CAM |
|
|
|
|
|
