| 引用本文: | 李国顺,潘迪夫,刘鹄然.加工复杂曲面的三阶切触原理.[J].国防科技大学学报,1999,21(3):108-111.[点击复制] |
| Li Guoshun,Pan Difu,Lui Huran.Third-order Contact Theory for Machining Sculpture Surface[J].Journal of National University of Defense Technology,1999,21(3):108-111[点击复制] |
|
| |
|
|
| 本文已被：浏览 6600次 下载 6305次 |
| 加工复杂曲面的三阶切触原理 |
| 李国顺, 潘迪夫, 刘鹄然 |
|
(长沙铁道学院 机电工程学院 湖南 长沙 410075)
|
| 摘要: |
| 本文把微分几何中曲线与曲面之间的“切触”概念应用于复杂曲面的数控加工, 提出用圆柱铣刀或圆锥盘铣刀的外圆在五坐标联动中加工三维自由曲面的最佳切触条件。 |
| 关键词: 三维自由曲面, 三阶切触, 坐标联动 |
| DOI： |
| 投稿日期：1998-12-17 |
| 基金项目: |
|
| Third-order Contact Theory for Machining Sculpture Surface |
| Li Guoshun, Pan Difu, Lui Huran |
|
(Electromechanic Engineering College, Changsha Railway University, Changsha, 410075)
|
| Abstract: |
| This paper introduces a new theory that the concept in differential geometry of “contact”between curve and camber is applied to numbercally controlled machining sculpture surface. It puts forward the optimum contact condition for machining sculpture surface using cylindrical tool or bevel cutter with five coordinates co-operating. |
| Keywords: sculpture surface, third-order contact, coordinates co-operating |
|
|
|
|
|
