| 引用本文: | 周云,张代兵,华祖耀,等.网络接口部件(NIU)中坐标转换算法的实现.[J].国防科技大学学报,2000,22(3):105-108.[点击复制] |
| ZHOU Yun,ZHANG Daibing,HUA Zuyao,et al.The Research and Implementation of Coordinate Transformation in Network Interface Unit[J].Journal of National University of Defense Technology,2000,22(3):105-108[点击复制] |
|
| |
|
|
| 本文已被：浏览 6489次 下载 6179次 |
| 网络接口部件(NIU)中坐标转换算法的实现 |
| 周云, 张代兵, 华祖耀, 黄柯棣 |
|
(国防科技大学 机电工程与自动化学院, 湖南 长沙 410073)
|
| 摘要: |
| 为使NIU 能提供把不同地域的仿真器联接到DIS 中的能力, 其主要功能之一就是坐标系统转换。本文介绍了DIS 标准坐标系及其它几种相关坐标系, 并在不同坐标系之间建立了坐标转换关系, 讨论了不同坐标系中姿态的不同表示方法及其转换关系, 同时在NIU 中用C+ + 实现了所有算法。 |
| 关键词: NIU 坐标系统 坐标转换 姿态角 |
| DOI： |
| 投稿日期：1999-11-29 |
| 基金项目:国家部委项目资助(4.4.3.7) |
|
| The Research and Implementation of Coordinate Transformation in Network Interface Unit |
| ZHOU Yun, ZHANG Daibing, HUA Zuyao, HUANG Kedi |
|
(College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| One of the NIU's primary functions is coordinate system conversion in order to provides us the ability to connect different areas simulators to DIS. This paper introduces the standard of coordinates on DIS and the other relative coordinates, and establishes the coordinate transformation among the different coordinate systems. The orientation representations in different coordinate system and the orientation transformation are also discussed. At the same time, the algorithms have been realized with C+ + in our NIU. |
| Keywords: NIU coordinate system coordinate transformation orientation |
|
|
|
|
|
