| 引用本文: | 赵万生,詹涵菁,王刚,等.带冠涡轮叶盘弯扭通道中复杂电极的进给轨迹.[J].国防科技大学学报,2000,22(5):78-82.[点击复制] |
| ZHAO Wansheng,ZHAN Hanjing,WANG Gang,et al.Feeding Complex Electrodes through Twist Channels of Rimed Turbine Blisks[J].Journal of National University of Defense Technology,2000,22(5):78-82[点击复制] |
|
| |
|
|
| 本文已被：浏览 6773次 下载 6720次 |
| 带冠涡轮叶盘弯扭通道中复杂电极的进给轨迹 |
| 赵万生, 詹涵菁, 王刚, 刘文涛 |
|
(哈尔滨工业大学 特种加工及机电控制研究所, 黑龙江 哈尔滨 150001)
|
| 摘要: |
| 整体涡轮叶盘精加工是决定叶盘最终几何精度的关键技术, 电火花加工 (EDM) 则是涡轮叶盘精加工的有力手段。在涡轮叶盘 EDM 精加工中电极的设计的基础上, 进行了电极在带冠叶盘弯扭狭窄通道中无干涉进给轨迹的搜索, 其中的核心问题是电极运动约束条件的确定。最后给出了轨迹搜索的范例结果。 |
| 关键词: 整体涡轮叶盘 电火花加工 多轴数控进给轨迹 进给轨迹搜索 |
| DOI： |
| 投稿日期：2000-05-10 |
| 基金项目:教育部“跨世纪优秀人才培养计划”基金资助 |
|
| Feeding Complex Electrodes through Twist Channels of Rimed Turbine Blisks |
| ZHAO Wansheng, ZHAN Hanjing, WANG Gang, LIU Wentao |
|
(Research Institute of Nontraditional Machining & Mechatronics, Harbin Institute of Technology, Harbin 150001, China)
|
| Abstract: |
| The finishing of turbine blisks, a critical technology determining the final geometric accuracy of blisks, can be implemented efficiently with the electrical discharge machining ( EDM). Upon the basis of the design of the electrode for blisk EDM finishing, the searching of an interference-free path for feeding an electrode through twist channels of a rimed blisk is carried out, in which the kernel problem is the determination of the electrode kinematic constraints. An implementation of the path-searching algorithm is illustrated with an example at the end of the paper. |
| Keywords: turbine blisks electric discharge machining multiaxis CNC feed path feed path searching |
|
|
|
|
|
