| 引用本文: | 丁 猛,李 桦,范晓樯.等截面隔离段中激波串结构的数值模拟.[J].国防科技大学学报,2001,23(1):15-18.[点击复制] |
| DING Meng,LI Hua,FAN Xiaoqiang.Numerical Simulation of Shock Train in a Constant Area Isolator[J].Journal of National University of Defense Technology,2001,23(1):15-18[点击复制] |
|
| |
|
|
| 本文已被：浏览 7334次 下载 6044次 |
| 等截面隔离段中激波串结构的数值模拟 |
| 丁 猛, 李 桦, 范晓樯 |
|
(国防科技大学 航天与材料工程学院, 湖南 长沙 410073)
|
| 摘要: |
| 采用二阶TVD格式的有限体积法偶合Baldwin-Lomax代数湍流模型求解雷诺平均Navier-stokes方程，数值模拟了二维矩形等截面隔离段中的流动现象，很好地模拟出由激波/附面层干扰所形成的复杂的激波串流场结构。计算结果与国外有关文献的结果进行了比较。 |
| 关键词: 数值模拟 有限体积法 隔离段 激波串 |
| DOI： |
| 投稿日期：2000-09-20 |
| 基金项目:湖南省自然科学基金资助项目（99JJY2005） |
|
| Numerical Simulation of Shock Train in a Constant Area Isolator |
| DING Meng, LI Hua, FAN Xiaoqiang |
|
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| A finite volume method is used to simulate the shock train flows in a generic two-dimensional constant area isolator. Isolator is an important components of Dual-Mode scramjet. The interaction between a normal shock wave and a boundary layer along a wall surface in isolator compressible flows causes a very complicated flow. The interaction region including a shock train and a mixing region in it is referred to as “pseudo-shock”. The finite volume method is used to solve the 2D Reynolds-averaged Navier-Stokes equation coupling the Baldwin-Lomax zero-equation turbulence model. In the numerical procedure, LUSGS method and TVD scheme are used. The numerical results simulate commendably the topology structure of the flows. |
| Keywords: numerical simulationl finite volume method isolator shock train |
|
|
