引用本文: | 沈辉,吴学忠,李圣怡,等.并联机构的奇异位形分析及冗余驱动控制方法.[J].国防科技大学学报,2002,24(2):91-94.[点击复制] |
SHEN Hui,WU Xuezhong,LI Shengyi,et al.Analysis of Singularity and Redundantly Control of Parallel Manipulators[J].Journal of National University of Defense Technology,2002,24(2):91-94[点击复制] |
|
|
|
本文已被:浏览 6778次 下载 6527次 |
并联机构的奇异位形分析及冗余驱动控制方法 |
沈辉1, 吴学忠1, 李圣怡1, 李泽湘2 |
(1.国防科技大学 机电工程与自动化学院,湖南 长沙 410073;2.香港科技大学电气与电子工程系,香港)
|
摘要: |
运用微分几何的方法分析了存在于并联机构中的各种奇异位形。采用冗余驱动方法解决并联机构奇异位形的控制问题。设计并实现了平面二自由度并联实验装置,并进行了冗余驱动控制实验。 |
关键词: 并联机构 奇异位形 冗余驱动 |
DOI: |
投稿日期:2001-11-19 |
基金项目:国家自然科学基金-香港青年学者合作研究基金资助项目(50029501) |
|
Analysis of Singularity and Redundantly Control of Parallel Manipulators |
SHEN Hui1, WU Xuezhong1, LI Shengyi1, LI Zexiang2 |
(1.College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China;2.Department of EEE,Hong Kong Univ. of Science and Technology,Hong Kong)
|
Abstract: |
This paper analyses the various singular configurations of parallel manipulators using differential geometry. In order to perform an effect control of parallel manipulators at singularity, an over-control method is discussed. Finally this paper tests the over-actuated PD strategy on the two degree-of-freedom planar parallel robot and simulations verify the method proposed. |
Keywords: parallel manipulator singular configuration over-control |
|
|
|
|
|