| 引用本文: | 马东平,戴一帆.六自由度装置滚转轴干扰源的诊断及其抑制.[J].国防科技大学学报,2002,24(3):86-89.[点击复制] |
| MA Dongping,DAI YiFan.Diagnosis and Depression of the Interference Source in the Roller Mechanism of the Six-Degree of Freedom Rig[J].Journal of National University of Defense Technology,2002,24(3):86-89[点击复制] |
|
| |
|
|
| 本文已被：浏览 5759次 下载 6095次 |
| 六自由度装置滚转轴干扰源的诊断及其抑制 |
| 马东平, 戴一帆 |
|
(国防科技大学 机电工程与自动化学院，湖南 长沙 410073)
|
| 摘要: |
| 为了查找滚转轴出现定位偏差的原因，通过对比多种情况下滚转轴的反馈信号，结合相应的定位试验，查出了导致滚转轴出现定位偏差的干扰源。基于对滚转轴反馈信号被干扰原因的分析，有针对性地采取了多项措施，并给出了这些措施的效果。最终采用给Y轴驱动器单独供电的方式解决了这一难题，经风洞试验证明，效果良好。 |
| 关键词: 滚转轴 反馈信号 干扰 抑制 隔离变压器 |
| DOI： |
| 投稿日期：2002-03-08 |
| 基金项目: |
|
| Diagnosis and Depression of the Interference Source in the Roller Mechanism of the Six-Degree of Freedom Rig |
| MA Dongping, DAI YiFan |
|
(College of Mechatronics Engineering and Automation, National Univ.of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| In order to find out the cause of position deviation of the roller mechanism, the interference source is determined by comparing the feedback signals and making position test at different situations. Based on analysis of the reason that the feedback signals are interfered, several measures are adopted and their effects are given. In the end, the problem is solved by using an isolation transformer for Y-axis driver. It is shown that this solution has good effects in wind tunnel test. |
| Keywords: roller mechanism feedback signal interference depression isolation transformer |
|
|
