| 引用本文: | 尹自强,李圣怡.振动影响下金刚石车削表面的形貌仿真.[J].国防科技大学学报,2003,25(1):78-83.[点击复制] |
| YIN Ziqiang,LI Shengyi.Simulation of the Surface Topography in Diamond Turning under the Effect of Vibration[J].Journal of National University of Defense Technology,2003,25(1):78-83[点击复制] |
|
| |
|
|
| 本文已被：浏览 6646次 下载 5895次 |
| 振动影响下金刚石车削表面的形貌仿真 |
| 尹自强, 李圣怡 |
|
(国防科技大学 机电工程与自动化学院，湖南 长沙 410073)
|
| 摘要: |
| 超精密车削加工中，影响工件表面形貌的主要因素有刀具的几何形状、进给速度、主轴转速、刀具与工件的相对振动等，考虑这些因素，对超精密加工的三维表面形貌进行建模，并通过仿真分析刀具轮廓在工件径向截面内可能发生的剪切现象。验证结果表明，用该模型仿真超精密端面车削的工件表面能得到较好的效果。利用该模型可以模拟刀具切削运动的轨迹、预测工件表面三维微观形貌及二维截面轮廓形状等表面特征，并可将其作为实际切削加工中切削参数优化的理论指导。 |
| 关键词: 仿真 表面形貌 金刚石车削 振动 |
| DOI： |
| 投稿日期：2002-09-15 |
| 基金项目:国家部委基金项目资助(2000J18.2.2KG0130) |
|
| Simulation of the Surface Topography in Diamond Turning under the Effect of Vibration |
| YIN Ziqiang, LI Shengyi |
|
(College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| In ultra-precision machining,the major factors influencing the surface topography of workpieces include many parameters of cutting process such as the tool geometry,feed rate,the speed of spindle and relative vibration between the tool and the workpiece.A surface topography simulation model of ultra-precision machining is established considering these factors.Trimming phenomenon of the tool edge profile is also analyzed at the radial section of the workpiece by the simulation program.It is experimentally shown that good effect is obtained by using the model to simulate the surface topography of ultra-precision face turning.The model can also be used for simulating the traces of tool motion,predicting the three-dimension microscopic surface topography and two-dimension section profile,and optimizing the cutting parameter for diamond turning process. |
| Keywords: simulation surface topography diamond turning vibration |
|
|
