引用本文: | 徐涛,罗武胜,吕海宝,等.微硅加速度计在定向钻进角度测量中的应用[J].国防科技大学学报,2004,26(2):75-78.[点击复制] |
XU Tao,LUO Wusheng,LU Haibao,et al.Application in Angles Measurement for Directional Drilling with Micromachined Polysilicon Accelerometers[J].Journal of National University of Defense Technology,2004,26(2):75-78[点击复制] |
|
|
|
本文已被:浏览 6237次 下载 5960次 |
微硅加速度计在定向钻进角度测量中的应用 |
徐涛, 罗武胜, 吕海宝, 董文娟 |
(国防科技大学 机电工程与自动化学院,湖南 长沙 410073)
|
摘要: |
针对地下定向钻进角度测量的特殊要求,提出了用一个单轴和双轴微硅加速度计测量地下钻头倾角和面向角的方法,组建了角度测量系统,给出温度补偿措施及相应的实验结果。结果表明,系统不仅具有体积小、成本低等优点,而且系统精度优于1℃,非常适合地下钻进测量。 |
关键词: 加速度计 定向钻 倾角 面向角 温度补偿 |
DOI: |
投稿日期:2003-09-14 |
基金项目:国家863基金资助项目(2003AA430120) |
|
Application in Angles Measurement for Directional Drilling with Micromachined Polysilicon Accelerometers |
XU Tao, LUO Wusheng, LU Haibao, DONG Wenjuan |
(College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
Abstract: |
Aiming at to the special demands for angles measurement while drilling underground, the paper describes a new approach of determining the pitch and the roll with a single-axis accelerometer and a dual-axis accelerometer. A feasible temperature compensation method is adopted in our established systemCorresponding experimental results are described. Results show that the system has the advantages of small size, low cost, and its accuracy is better than 1°C. It is especially suitable for directional drilling to obtain the desired angles. |
Keywords: accelerometer directional drilling pitch roll temperature compensation |
|
|
|
|
|