| 引用本文: | 薛金根,肖加余,王应德,等.聚碳硅烷表面张力的测定及其对纤维异形度的影响机理.[J].国防科技大学学报,2004,26(4):68-71.[点击复制] |
| XUE Jingen,XIAO Jiayu,WANG Yingde,et al.Measurement of the Surface Tension of Polycarbosilane and the Influence Mechanism on the Profile Degree of PCS Fiber[J].Journal of National University of Defense Technology,2004,26(4):68-71[点击复制] |
|
| |
|
|
| 本文已被：浏览 6817次 下载 5802次 |
| 聚碳硅烷表面张力的测定及其对纤维异形度的影响机理 |
| 薛金根, 肖加余, 王应德, 蓝新艳 |
|
(国防科技大学 航天与材料工程学院，湖南 长沙 410073)
|
| 摘要: |
| 采用改进的滴重法测定了先驱体聚碳硅烷(PCS)的表面张力，并探讨了表面张力对三叶形聚碳硅烷原丝异形度的影响机理。通过对纤维截面形貌的扫描电镜分析，发现表面张力对三叶形PCS纤维异形截面的形成有着较大的影响，它和粘滞阻力相互竞争的共同作用决定了三叶形PCS纤维异形度的大小。研究表明，先驱体PCS的表面张力与温度基本上呈线性关系，温度越高，PCS的表面张力就越小。 |
| 关键词: 聚碳硅烷 表面张力 纤维 异形度 |
| DOI： |
| 投稿日期：2004-03-10 |
| 基金项目:国家863计划资助项目(2002AA305101)；湖南省自然科学基金资助项目(02JJY2083) |
|
| Measurement of the Surface Tension of Polycarbosilane and the Influence Mechanism on the Profile Degree of PCS Fiber |
| XUE Jingen, XIAO Jiayu, WANG Yingde, LAN Xinyan |
|
(College of Aerospace and Materials Engineering, National Univ.of Defense Technology, Changsha 410073,China)
|
| Abstract: |
| By the improved suspending drop instrument, the surface tension of precursor polycarbosilane(PCS)is measured besides the influence mechanism of surface tension on the profile-degree of trilobal section PCS fiber is discussed. Through research by SEM, we discovered that the surface tension influences greatly on the formation of the profile-degree of trilobal section PCS fiber，the competitive action between it and the agglutination resistance decides the size of the profile-degree of trilobal section PCS fiber. We also discovered that the relation between the surface tension of PCS and the temperature is basically linear.The higher the temperature，the smaller the surface tension of PCS. |
| Keywords: polycarbosilane surface tension fiber profile-degree |
|
|
|
|
|
