| 引用本文: | 廖瑛,庄景钊,梁加红.直升机工作特性建模与飞行性能仿真.[J].国防科技大学学报,2004,26(5):5-8.[点击复制] |
| LIAO Ying,ZHUANG Jingzhao,LIANG Jiahong.The Modeling of the Working Characteristics and Simulation of the Flying Performance of Helicopters[J].Journal of National University of Defense Technology,2004,26(5):5-8[点击复制] |
|
| |
|
|
| 本文已被：浏览 7668次 下载 5854次 |
| 直升机工作特性建模与飞行性能仿真 |
| 廖瑛1, 庄景钊2, 梁加红3 |
|
(1.国防科技大学 航天与材料工程学院，湖南 长沙 410073;2.中国酒泉卫星发射中心，甘肃 兰州 732750;3.国防科技大学 机电工程与自动化学院，湖南 长沙 410073)
|
| 摘要: |
| 以涡轮轴发动机工作特性建模为中心，对某系列直升机飞行性能进行仿真研究, 力争实现对直升机实施“基于状态的维修”。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法，建立了涡轮轴发动机的数学模型，并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化，得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真，应用结果表明该方法是可信、高效的。 |
| 关键词: 直升机 涡轮轴发动机 建模与仿真 维修 |
| DOI： |
| 投稿日期：2004-03-04 |
| 基金项目:国家部委基金资助项目(20010695) |
|
| The Modeling of the Working Characteristics and Simulation of the Flying Performance of Helicopters |
| LIAO Ying1, ZHUANG Jingzhao2, LIANG Jiahong3 |
|
(1.College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China;2.China Jiuquan Satellite Launch Center, Lanzhou 732750, China;3.College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| The modeling & simulation of the flying performance of helicopters is developed here in order to maintain them based on their states. It is centered on the modeling of the working characteristics of the turboshaft. First, the descriptions of the flying performance of helicopters and the characteristics of the turboshaft are discussed, and a math model of the working process of the turboshaft is built. Then the model is predigested according to the calculating program of the engine's test performance. Finally, the flying performance simulation is realized through the calculation based on the simplified model. The results show that this method is credible and high efficienct. |
| Keywords: helicopters turboshaft modeling & simulation maintenance |
|
|
|
|
|
