引用本文: | 戴一帆,袁征,陈浩锋,等.热压多晶氟化镁的磁流变抛光研究[J].国防科技大学学报,2008,30(5):99-102.[点击复制] |
DAI Yifan,YUAN Zheng,CHEN Haofeng,et al.Magnetorheological Finishing for MgF2Crystal Processed under High Temperature and High Pressure[J].Journal of National University of Defense Technology,2008,30(5):99-102[点击复制] |
|
|
|
本文已被:浏览 6848次 下载 5483次 |
热压多晶氟化镁的磁流变抛光研究 |
戴一帆, 袁征, 陈浩锋, 尹自强 |
(国防科学技术大学 机电工程与自动化学院,湖南 长沙 410073)
|
摘要: |
热压多晶氟化镁是一种被广泛应用的红外光学材料。磁流变抛光因其抛光效率高、磨头无磨损、可实现确定性加工等优点而日益成为倍受瞩目的超精密光整加工技术。在利用传统抛光方法得到热压多晶氟化镁的抛光特性的基础上配制了适用于该材料的磁流变抛光液。通过抛光实验证明,与传统抛光方法相比,采用磁流变抛光方法对热压多晶氟化镁进行抛光,可以得到较好抛光表面质量,并且抛光的效率也大大提高。 |
关键词: 氟化镁 磁流变抛光 磁流变液 |
DOI: |
投稿日期:2008-06-06 |
基金项目:教育部新世纪优秀人才支持计划(NCET)资助;国家自然科学基金重点资助项目(50535020) |
|
Magnetorheological Finishing for MgF2Crystal Processed under High Temperature and High Pressure |
DAI Yifan, YUAN Zheng, CHEN Haofeng, YIN Ziqiang |
(College of Mechatronics Engineering and Automation, National Univ. of Defense Technology, Changsha 410073, China)
|
Abstract: |
Magnesium Fluoride crystal processed under high temperature and high pressure, one of the infrared optic material, has been used in many areas. Magnetorheological finishing (MRF) is becoming an ultra-precision finshing technology because of its excellencies of high polishing efficiency, no wear and certain polishing. In this paper, at the first, the polishing characteristics are obtained by using traditional polishing method; and then, a new magnetorheological fluid suitable to finishing Magnesium Fluoride is developed. Compared to traditional polishing method, the method proposed here can yield higher surface quality and higher polishing efficiency. |
Keywords: Magnesium Fluoride (MgF2) magnetorheological finishing (MRF) magnetorheological fluid |
|
|
|
|
|