| 引用本文: | 李理,刘巍,杨涛.冲压增程弹进气道设计方法与性能分析.[J].国防科技大学学报,2008,30(6):1-5.[点击复制] |
| LI Li,LIU Wei,YANG Tao.Inlet Design and Performance Calculation for Ramjet Assisted Projectile[J].Journal of National University of Defense Technology,2008,30(6):1-5[点击复制] |
|
| |
|
|
| 本文已被：浏览 7446次 下载 6212次 |
| 冲压增程弹进气道设计方法与性能分析 |
| 李理, 刘巍, 杨涛 |
|
(国防科技大学 航天与材料工程学院，湖南 长沙 410073)
|
| 摘要: |
| 以冲压增程弹为应用背景进行了进气道设计。结合增程弹的特点，讨论了轴对称进气道中心锥参数、喉道参数、外罩参数的选择。特别对进气道唇口处参数、扩张段角度设计方法进行了分析。设计了单锥混压式、单锥外压式以及双锥混压式三种进气道，并进行了数值模拟。分析了进气道主要设计参数对其性能的影响。数值结果表明，就增程弹的性能要求而言，双锥混压式进气道的性能较高。 |
| 关键词: 进气道 冲压增程弹 数值模拟 性能分析 |
| DOI： |
| 投稿日期：2008-06-17 |
| 基金项目:国家自然科学基金资助项目(50376072) |
|
| Inlet Design and Performance Calculation for Ramjet Assisted Projectile |
| LI Li, LIU Wei, YANG Tao |
|
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| An inlet has been designed for ramjet assisted range projectile. With the features of ramjet assisted range projectile, such factors as cone parameters, throat parameters, encloser and parameters have been discussed. In particular, an analysis of cone lip parameters and diffuser angle is made. Furthermore, three inlets, single cone with inner contraction, single cone without contraction, and double cone with inner contraction have been designed. With these inlets, numerical simulation and performance also have been conducted. The effect of decisive parameters in inlet design has been analyzed. The result of numerical simulation shows that under the requirement of ramjet assisted range projectile, double cone with inner contraction has better performance. |
| Keywords: inlets ramjet assisted range projectile numerical simulation performance analysis |
|
|
|
|
|
