引用本文: | 刘巍,杨涛,程兴华,等.固体燃料冲压发动机两种内旁路构型燃烧性能数值分析[J].国防科技大学学报,2009,31(4):107-111.[点击复制] |
LIU Wei,YANG Tao,CHENG Xinghua,et al.Combustion Performance Numerical Analysis on Two Styles of Inner Bypass for Solid Fuel Ramjet[J].Journal of National University of Defense Technology,2009,31(4):107-111[点击复制] |
|
|
|
本文已被:浏览 6483次 下载 5211次 |
固体燃料冲压发动机两种内旁路构型燃烧性能数值分析 |
刘巍, 杨涛, 程兴华, 李理 |
(国防科技大学 航天与材料工程学院,湖南 长沙 410073)
|
摘要: |
使用数值模拟方法对比分析了环型通道与齿轮型通道两种内旁路构型的燃烧性能,固体燃料为丁羟,燃烧采用总包反应,反应速率由涡团耗散模型计算。研究发现,环型通道在补燃室头部产生突扩回流区,仍为扩散燃烧;齿轮型通道在补燃室头部产生对称的涡结构,能够增强未燃烧燃料与旁路空气的掺混效果,且总压损失与环型相当,综合燃烧性能较好。 |
关键词: 固体燃料冲压发动机 旁路 燃烧 数值分析 |
DOI: |
投稿日期:2009-02-20 |
基金项目:国家自然科学基金资助项目(50376072) |
|
Combustion Performance Numerical Analysis on Two Styles of Inner Bypass for Solid Fuel Ramjet |
LIU Wei, YANG Tao, CHENG Xinghua, LI Li |
(College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
Abstract: |
Two styles of inner bypass structure, the annulus style and gear style, were numerically studied. The fuel was HTPB while the overall reaction process and Eddy-Dissipation Model were adapted. It was concluded that the combustion in the dump afterburning chamber of annulus style was still controlled by diffuse. The gear style could induce couples of symmetrical vortexs in the head of dump afterburning chamber, which could enhance the mixing effect of unburned fuel and bypass air, and the total pressure loss was approximately approaching the annulus style, thus the combustion performance of gear style performs better. |
Keywords: solid fuel ramjet bypass combustion numerical analysis |
|
|
|
|
|