| 引用本文: | 李国喜,吴建忠,张萌,等.基于功能-原理-行为-结构的产品模块化设计方法.[J].国防科技大学学报,2009,31(5):75-80.[点击复制] |
| LI Guoxi,WU Jianzhong,ZHANG Meng,et al.Approach to Product Modular Design Based on FPBS[J].Journal of National University of Defense Technology,2009,31(5):75-80[点击复制] |
|
| |
|
|
| 本文已被：浏览 7163次 下载 6155次 |
| 基于功能-原理-行为-结构的产品模块化设计方法 |
| 李国喜1, 吴建忠2, 张萌1, 龚京忠1, 常品要1 |
|
(1.国防科技大学 机电工程与自动化学院，湖南 长沙 410073;2.航天科工集团二院283厂军事代表室，北京 100854)
|
| 摘要: |
| 把机械产品的迭代设计分解拓扑模型与模块化设计方法相结合，提出了基于功能-原理-行为-结构的机械产品模块化设计方法。主要讨论了基于功能-原理-行为-结构的产品迭代设计分解原理；分析了设计分解过程中功能→原理 行为→结构→功能的演进的纵向迭代过程；探讨了产品设计分解的横向动态建模方法；产品迭代设计分解过程引入模块化方法，建立了基于功能-原理-行为-结构的复杂机械系统模块化设计基本方法。 |
| 关键词: 功能-原理-行为-结构 迭代设计 模块化 设计方法 |
| DOI： |
| 投稿日期：2009-04-02 |
| 基金项目:国家部委资助项目(51318010407，51318010604)；湖南省科技计划重点资助项目(2007GK2011) |
|
| Approach to Product Modular Design Based on FPBS |
| LI Guoxi1, WU Jianzhong2, ZHANG Meng1, GONG Jingzhong1, CHANG Pinyao1 |
|
(1.College of Mechatronics Engineering and Automation，National Univ. of Defense Technology，Changsha 410073，China;2.PLA，Military Representative Room of No.283 Factory of CASIC，Beijing 100854，China)
|
| Abstract: |
| By combining decomposition topology model of iterative design for mechanical products with modularization, a modular design method for mechanism based on function-principle-behavior-structure is put forward. Product iterative design decomposition principle based on function-principle-behavior-structure is mainly discussed. Portrait iterative process of function(principle(behavior(structure(function evolvement during design decomposition is analyzed. Transverse dynamic modeling means of product design decomposition is clarrified. Basic modular design method for complicated mechanism based on FPBS is established by introducing modulization into the product iterative design composition process. |
| Keywords: function-principle-behavior-structure iterative design modularization design method |
|
|
