引用本文: | 晁志超,姜广文,伏思华,等.摄像机网络摄像测量中多目传递站位姿关系的最优标定[J].国防科技大学学报,2011,33(5):45-49.[点击复制] |
CHAO Zhichao,JIANG Guangwen,FU Sihua,et al.Optimization Calibration of Multi-camera Relay Station in the Videometric Using Camera Network[J].Journal of National University of Defense Technology,2011,33(5):45-49[点击复制] |
|
|
|
本文已被:浏览 6846次 下载 5739次 |
摄像机网络摄像测量中多目传递站位姿关系的最优标定 |
晁志超1, 姜广文1, 伏思华1, 于起峰2 |
(1.国防科技大学 光电科学与工程学院,湖南 长沙 410073;2.国防科技大学 航天与材料工程学院,湖南 长沙 410073)
|
摘要: |
在摄像机网络摄像测量中,经常会用到多目传递站进行相邻节点间位姿关系的传递。针对多目传递站中固连的多个摄像机之间位姿关系的标定难题,提出了一种基于冗余标定的优化标定方法。首先,对多目传递站中的独立位姿关系数目、最大可测量位姿数目、最小约束数目等进行了分析和推导;然后,对典型的四目传递站间各摄像机相对位姿关系的优化标定算法进行了阐述,对一般的多目传递站位姿参数的标定问题给出了通用的优化方法;最后,对四目传递站的优化算法进行了数值仿真,仿真结果证明了优化算法的可行性与有效性。 |
关键词: 摄像机网络 摄像测量 位姿标定 测量平差 |
DOI: |
投稿日期:2010-12-19 |
基金项目:国家自然科学基金资助项目(10727202) |
|
Optimization Calibration of Multi-camera Relay Station in the Videometric Using Camera Network |
CHAO Zhichao1, JIANG Guangwen1, FU Sihua1, YU Qifeng2 |
(1.College of Opto-electronic Science and Engineering, National Univ. of Defense Technology, Changsha 410073, China;2.College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
|
Abstract: |
Multi-camera relay station is usually used to relay pose parameters among neighboring nodes in the videometric using camera network. An optimization method based redundancy calibration is proposed to solve the problem. Firstly, the number of independent pose parameters, the maximum number of measurable pose parameters and the minimum number of restricted condition were analyzed for a normal multi-camera relay station. Then, the optimized calibrating algorithm for a typical four-camera relay station was given,and the optimized method for general relay station calibration was suggested as well. Finally, a numerical simulation of the proposed algorithm for four-camera relay station calibration was conducted. The results show that the algorithm is feasible and effective. |
Keywords: camera network videometric pose calibration survey adjustment |
|
|
|
|
|