| 引用本文: | 倪少杰,许晓勇,葛锐,等.直接序列扩频信号仿真数据的高效生成方法.[J].国防科技大学学报,2012,34(2):51-54.[点击复制] |
| NI Shaojie,XU Xiaoyong,Ge rui,et al.Efficient generation method of direct sequence spread spectrum simulation data[J].Journal of National University of Defense Technology,2012,34(2):51-54[点击复制] |
|
| |
|
|
| 本文已被：浏览 7256次 下载 6258次 |
| 直接序列扩频信号仿真数据的高效生成方法 |
| 倪少杰, 许晓勇, 葛锐, 王飞雪 |
|
(国防科技大学 电子科学与工程学院，湖南 长沙 410073)
|
| 摘要: |
| 扩频技术在通信和卫星导航领域得到了广泛应用，传统仿真数据的生成方法存在计算量大、忽略信道影响因素，较难实现高精度生成等问题。结合扩频系统信号和噪声的特点，提出了基于扩频码码片相关的信号生成以及基于AR模型的带限高斯噪声生成两种高效仿真信号生成方式。该方法计算量相对于传统高精度方法可由1GHz的生成速率降低至码片速率级的数据生成速率，同时保证了信号生成的灵活性和可控性。相关结果可用于现代化导航接收机的仿真数据快速生成。 |
| 关键词: 直接序列扩频 GNSS 信号建模 数据仿真 高效生成 |
| DOI： |
| 投稿日期：2011-12-07 |
| 基金项目: |
|
| Efficient generation method of direct sequence spread spectrum simulation data |
| NI Shaojie, XU Xiaoyong, Ge rui, WANG Feixue |
|
(College of Electronic Science and Engineering, National University of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| Spread spectrum technology has been widely used in the field of communication and satellite navigation. Traditional methods to generate simulation data have heavy computation burden, ignoring the channel factors and other issues. Considering characteristics of spread spectrum systems signals and noise, a fast and efficient method is presented to generate signals based on spreading code chip and band-limited Gaussian noise based on AR model. Compared with the conventional high-precision methods, the complexity of calculation decreased from 1GHz rate to chip rate, and maintained the flexibility of signal generation and channel factors control at the same time. This research can be used in the simulation of modern GNSS receivers. |
| Keywords: direct sequence spread spectrum GNSS signal modeling data simulation efficient generation |
|
|
|
|
|
