引用本文: | 雷勇军,杨震,王成龙,等.增压充液贮箱振动特性的理论与实验.[J].国防科技大学学报,2012,34(5):15-20.[点击复制] |
LEI Yongjun,YANG Zhen,WANG Chenglong,et al.Theory and experiment for vibration analysis of liquid-filled tank with internal pressure[J].Journal of National University of Defense Technology,2012,34(5):15-20[点击复制] |
|
|
|
本文已被:浏览 8125次 下载 6524次 |
增压充液贮箱振动特性的理论与实验 |
雷勇军, 杨震, 王成龙, 宋先村, 李道奎 |
(国防科技大学 航天与材料工程学院,湖南 长沙 410073)
|
摘要: |
结合理论与实验方法研究了增压充液贮箱的振动特性。采用弹性薄壳理论和速度势理论建立了增压充液贮箱的动力学方程组。考虑内部加压对贮箱振动的影响,引入内外压差作用项;考虑弹性壳体与液体间的耦合作用,给出液体动压的表达式。采用经典边界值法计算出贮箱振动频率;设计贮箱模型进行固有振动频率的实验测试。所得计算结果与实验值一致,均表明充液使贮箱振动频率下降,而内部加压使贮箱振动频率增加。进一步分析,得到增压充液贮箱振动频率随波数、贮箱内压、充液密度、贮箱几何参数和材料刚度等因素的变化规律。 |
关键词: 增压充液贮箱 振动分析 边界值法 |
DOI: |
投稿日期:2012-04-26 |
基金项目:教育部新世纪优秀人才支持计划项目(NCET-08-0148);2009年度校级本科学员创新性实验计划项目 |
|
Theory and experiment for vibration analysis of liquid-filled tank with internal pressure |
LEI Yongjun, YANG Zhen, WANG Chenglong, SONG Xiancun, LI Daokui |
(College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha 410073, China)
|
Abstract: |
A theoretical and experimental investigation of the vibration characteristics of fluid-filled tank with internal pressure is presented. The dynamic equations of vibration are based on the elastic mechanics and velocity potential theory. The form related to the difference of pressure inside and outside was given by analysis of its effects on the tank. Also the form related to the solid-fluid interaction was given by analysis of its effects. The classic boundary-value approach was used here to calculate the natural frequencies of the tank. A modal experiment about vibration characteristics of fluid-filled tank with internal pressure was conducted, and the frequencies were measured. Results of theoretical calculation agree with the experimental data, which indicates that the frequencies of the tank decrease when filled with liquid, but they increases with internal pressure, compared with that of the empty tank. Further analysis of the results shows the effects of factors, such as the wave number, internal pressure, fluid density, structural geometric parameters and flexural rigidity of the tank on the dynamical behaviors. |
Keywords: fluid-filled tank with pressure vibration analysis boundary-value approach |
|
|
|
|
|