引用本文: | 袁杰红,林泽锦.弧齿锥齿轮摩擦功率损失计算[J].国防科技大学学报,2012,34(5):115-120.[点击复制] |
YUAN Jiehong,LIN Zejin.The calculation of friction power loss for spiral bevel gears[J].Journal of National University of Defense Technology,2012,34(5):115-120[点击复制] |
|
|
|
本文已被:浏览 10907次 下载 8291次 |
弧齿锥齿轮摩擦功率损失计算 |
袁杰红, 林泽锦 |
(国防科技大学 指挥军官基础教育学院,湖南 长沙 410073)
|
摘要: |
基于齿轮啮合原理和摩擦学理论,将弧齿锥齿轮等效为当量直齿圆柱齿轮,并综合考虑啮合点相对滑动速度、法向载荷、摩擦系数等时变性因素和实际重合度的影响,建立弧齿锥齿轮摩擦功率损失计算模型。基于该模型,以某型直升机尾减速器弧齿锥齿轮为对象,对其进行摩擦功率损失计算分析。结果表明,该计算模型考虑因素全面、分析方法简便、计算结果准确可靠,对弧齿锥齿轮摩擦功率损失计算具有参考价值。 |
关键词: 弧齿锥齿轮 弹流润滑 摩擦系数 摩擦功率损失 |
DOI: |
投稿日期:2012-04-19 |
基金项目:校科研计划资助项目(JC11-09-01) |
|
The calculation of friction power loss for spiral bevel gears |
YUAN Jiehong, LIN Zejin |
(College of Basic Education for Commanding Officers, National University of Defense Technology, Changsha 410073, China)
|
Abstract: |
Based on the principle of gear engaging and tribology theory, by simplifying spiral bevel gear to spur gear, and by considering the impact of gear contact ratio and time-variant factors including meshpoint relative sliding velocity, normal load, and friction coefficient, the computing model of friction power loss for spiral bevel gear was established. According to the model, the friction power loss was calculated and analyzed by taking the spiral bevel gear of a helicopter tail reducer as research object. The results show that the computing model is reasonable, simple and reliable, and has a reference value to calculate the friction power loss for spiral bevel gears. |
Keywords: spiral bevel gear elastohydrodynamic lubrication friction coefficient friction power loss |
|
|