| 引用本文: | 李建林,唐乾刚,霍霖,等.复杂外形高超声速飞行器气动热快速工程估算.[J].国防科技大学学报,2012,34(6):89-93.[点击复制] |
| LI Jianlin,TANG Qiangang,HUO Lin,et al.The rapid engineering aero-heating calculation method for complex shaped hypersonic vehicles[J].Journal of National University of Defense Technology,2012,34(6):89-93[点击复制] |
|
| |
|
|
| 本文已被：浏览 7678次 下载 7472次 |
| 复杂外形高超声速飞行器气动热快速工程估算 |
| 李建林, 唐乾刚, 霍霖, 程兴华 |
|
(国防科技大学 航天与材料工程学院，湖南 长沙 410073)
|
| 摘要: |
| 针对复杂外形高超声速飞行器方案设计阶段的气动热计算效率问题，建立了高超声速飞行器气动热的快速工程计算方法。采用修正牛顿理论确定飞行器表面压力分布，利用牛顿最速下降理论计算飞行器表面流线分布，采用参考焓法、高温空气热力学特性的拟合公式以及热流密度的工程计算公式求出飞行器表面目标点的热流密度，计算了钝锥、升力体以及类乘波体的表面热流分布。仿真分析表明：该方法适用于复杂外形，且具有较高的计算效率和精度，能够满足复杂高超声速飞行器设计方案阶段气动热估算需求。 |
| 关键词: 气动热快速工程计算 牛顿最速下降理论 参考焓法 复杂外形 |
| DOI： |
| 投稿日期：2012-08-30 |
| 基金项目:国家部委资助项目 |
|
| The rapid engineering aero-heating calculation method for complex shaped hypersonic vehicles |
| LI Jianlin, TANG Qiangang, HUO Lin, CHENG Xinghua |
|
(College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| Aimed for the question of computational efficiency during conceptual design stage, a rapid engineering aero-heating calculation method for complex shaped hypersonic vehicles is established. Firstly the pressure distribution along vehicle’s surface was calculated by modified Newtonian theory. Secondly, the streamline that passes through the target point was calculated with Newtonian steepest decent concept. Then by using the fitted function of high temperature gas parameters, reference enthalpy method and engineering calculation function of aero-heating, the heat current of target point was presented. Finally, the heat flux on the surfaces of blunted cone, lifting body and wave-rider vehicle was calculated The analysis result shows the method used in this paper is fit for complex figure, and can satisfy the aero-heating calculation during conceptual design stage in both efficiency and precision. |
| Keywords: rapid engineering aero-heating calculation Newtonian steepest decent concept reference enthalpy method complex figure |
|
|
|
|
|
