引用本文: | 张志雄,江志新,杨拥民,等.关节对中误差对机械臂末端定位精度影响[J].国防科技大学学报,2014,36(6):185-190.[点击复制] |
ZHANG Zhixiong,JIANG Zhixin,YANG Yongmin,et al.Joint clearance effects on robot manipulators positional error[J].Journal of National University of Defense Technology,2014,36(6):185-190[点击复制] |
|
|
|
本文已被:浏览 8352次 下载 6692次 |
关节对中误差对机械臂末端定位精度影响 |
张志雄1, 江志新1, 杨拥民2, 唐力1, 闫超1 |
(1.国防科技大学 机电工程与自动化学院, 湖南 长沙 410073;2.国防科技大学 装备综合保障技术重点实验室, 湖南 长沙 410073)
|
摘要: |
针对机械臂关节对中误差对机械臂末端定位精度影响进行研究。以6自由度机械臂为研究对象,利用D-H法建立了机械臂运动学模型,并建立对中误差传递数学模型。利用蒙特卡洛方法以MATLAB为平台进行了误差分布仿真实验,得出了由于对中误差引起的机械臂末端定位误差分布特点,以及在不同对中误差等级下,机械臂末端定位误差概率分布情况。为对中误差修正提供了参考基础,同时为机械臂定位精度评价提供了定量化依据。 |
关键词: 关节对中误差 定位精度 蒙特卡洛仿真 |
DOI:10.11887/j.cn.201406032 |
投稿日期:2014-07-29 |
基金项目: |
|
Joint clearance effects on robot manipulators positional error |
ZHANG Zhixiong1, JIANG Zhixin1, YANG Yongmin2, TANG Li1, YAN Chao1 |
(1.College of Mechatronics Engineering and Automation, National University of Defense Technology, Changsha 410073, China;2.Laboratory of Science and Technology on Integrated Logistics Support, National University of Defense Technology, Changsha 410073, China)
|
Abstract: |
The effects of joint clearance on robot manipulators positional error were investigated. The kinematic model was built by using the D-H method to research the six degrees of freedom mechanical arm. The central error propagation model was established. The simulations of error distribution were conducted in MATLAB with Monee Carlo method. The distribution characteristic and probability distribution of positional error of mechanical arm's end, which is caused by the joint clearance, were obtained from the simulations at different levels of joint clearance. This research provides basis for error compensation and positional error evaluation. |
Keywords: joint clearance positional error Monte-Carlo simulation |
|
|