引用本文: | 赵宁,秋朋园,刘贵立.高重合度人字齿轮轮齿最佳修形优化设计.[J].国防科技大学学报,2015,37(1):165-170.[点击复制] |
ZHAO Ning,QIU Pengyuan,LIU Guili.Modification optimization of double helical gears with high contact ratio[J].Journal of National University of Defense Technology,2015,37(1):165-170[点击复制] |
|
|
|
本文已被:浏览 8907次 下载 7826次 |
高重合度人字齿轮轮齿最佳修形优化设计 |
赵宁, 秋朋园, 刘贵立 |
(西北工业大学 机电学院,陕西 西安 710072)
|
摘要: |
基于斜齿轮轮齿接触分析技术,建立了考虑人字齿轮典型安装误差的抛物线人字齿轮轮齿接触分析方法。综合考虑人字齿轮的传动误差与啮合特性,采用带精英策略的快速非支配排序遗传算法对高重合度人字齿轮的传动性能进行了多目标优化设计,该算法克服了优化结果的局部收敛,获得了人字齿轮最佳的齿廓、齿向抛物线修形参数。通过实例表明,修形优化后的齿面啮合印痕与传动误差较优化之前得到了明显的改善,有效地改善了高重合度人字齿轮的齿面偏载现象,降低了齿轮传动过程中的啮合冲击。对加工的人字齿轮在减振降噪试验台上进行带载试验,对比优化前后的噪音分贝值,进一步验证了该优化方法对人字齿轮副减振降噪具有一定作用。 |
关键词: 多目标优化 人字齿轮 轮齿接触分析 遗传算法 抛物线修形参数 噪音 |
DOI:10.11887/j.cn.201501028 |
投稿日期:2014-04-23 |
基金项目: |
|
Modification optimization of double helical gears with high contact ratio |
ZHAO Ning, QIU Pengyuan, LIU Guili |
(School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China)
|
Abstract: |
Parabola modification method of double helical gears was proposed, tooth contact analysis of modified gears including typical install errors was established based on tooth contact analysis of helical gears. Considering the transmission errors and meshing performance, transmission behavior of double helical gears was optimized from using the fast non-dominated sorting genetic algorithm to obtain the best parabola modification coefficient which could also avoid the local convergence. Examples show that path of contact and transmission errors of optimized gears are preferable distinctly. It has an important significance in improving distribution of load of tooth surface as well as reducing gear meshing impact. In the end, the noise value of original gears and optimization ones are obtained by the loaded test, further verifies the optimal method has certain effect on the noise reduction of gears. |
Keywords: multi-objective optimization double helical gears tooth contact analysis genetic algorithm parabola modification coefficient noise |
|
|