| 引用本文: | 朱丹妮,张军,钟辉煌,等.冷阴极高阻抗相对论速调管放大器的模拟研究.[J].国防科技大学学报,2015,37(2):19-23.[点击复制] |
| ZHU Danni,ZHANG Jun,ZHONG Huihuang,et al.Simulation of a high impedance relativistic klystron amplifier with a cold cathode[J].Journal of National University of Defense Technology,2015,37(2):19-23[点击复制] |
|
| |
|
|
| 本文已被：浏览 8538次 下载 6588次 |
| 冷阴极高阻抗相对论速调管放大器的模拟研究 |
| 朱丹妮, 张军, 钟辉煌, 戚祖敏 |
|
(国防科技大学 光电科学与工程学院，湖南 长沙 410073)
|
| 摘要: |
| 采用粒子模拟软件，建立了冷阴极发射实心束的高阻抗相对论速调管放大器模型。该模型由1个带屏蔽环的二极管，5个简单药盒型谐振腔和1个锥形收集极构成。为了给具有高效率的高阻抗相对论速调管提供实心束，同时实现设备的简单化和紧凑化，采用冷阴极取代传统的热电子枪，不仅易操作而且大大降低能耗和经费。在传统二极管阴极侧面引入屏蔽环，利用屏蔽极大地提高电子束阻抗，同时屏蔽环的位置和形状能明显降低非发射区的场强，并且有效改善阴极端面发射的均匀性。在束波互作用区，通过依次调节末前腔和输出腔的位置并结合导引磁场的大小对输出的微波进行优化，结果表明：在二极管发射电压525kV、电流328A的实心束及外加磁场0.35T的条件下， 当注入功率为1kW时， 在11.424GHz的中心频率处获得了功率81MW，效率47%，增益49dB的微波。 |
| 关键词: 相对论速调管放大器 高阻抗 冷阴极 粒子模拟 |
| DOI：10.11887/j.cn.201502005 |
| 投稿日期：2015-01-05 |
| 基金项目:国家自然科学基金资助项目（61401485） |
|
| Simulation of a high impedance relativistic klystron amplifier with a cold cathode |
| ZHU Danni, ZHANG Jun, ZHONG Huihuang, QI Zumin |
|
(College of Optoelectric Science and Engineering, National University of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| A high impedance relativistic klystron amplifier with a cold solid cathode is designed and investigated by 2.5-D particle-in-cell simulations. The model is composed of a diode with a shielding ring, five pill-box cavities and a cone collector. In order to simplify and minimize the cathode structure, a cold cathode is designed and adopted in a high-impedance relativistic klystron amplifier with rather high conversion efficiency. A shielding ring is introduced to achieve the desired high impedance and reduces the surface electric field to avoid unexpected explosive emissions and ensures the emission uniformity. In the beam-wave interaction region, with optimization of the position of the last two cavities and the magnetic field, the performance of the klystron is validated. It reveals that microwaves with a power of 81 MW are generated at a frequency of 11.424GHz when the beam voltage and current are 525kV and 328 A respectively, under a guiding magnetic field of 0.35 T. The corresponding power conversion efficiency is as high as 47%, and the gain reaches 49 dB when the net injection power is 1 kW. |
| Keywords: relativistic klystron high impedance cold cathode PIC simulation |
|
|
|
|
|
