| 引用本文: | 李谨,唐国金.拉伸-剪切耦合层合板优化设计及其应用.[J].国防科技大学学报,2015,37(5):121-127.[点击复制] |
| LI Jin,TANG Guojin.Optimization design of extension-shear coupled laminates and application in extension-twist coupled structure[J].Journal of National University of Defense Technology,2015,37(5):121-127[点击复制] |
|
| |
|
|
| 本文已被：浏览 7777次 下载 6002次 |
| 拉伸-剪切耦合层合板优化设计及其应用 |
| 李谨, 唐国金 |
|
(国防科技大学 航天科学与工程学院， 湖南 长沙 410073)
|
| 摘要: |
| 针对标准铺层拉伸-剪切耦合层合板耦合效应弱的缺点，提出利用优化法的自由铺层拉伸-剪切耦合层合板的设计方法。推导了只具有拉伸-剪切耦合效应的层合板应满足的条件。优化得到了7～14层的自由铺层拉伸-剪切耦合对称层合板。对比分析了自由与标准铺层拉伸-剪切耦合层合板的屈曲强度与稳定性。采用自由铺层拉伸-剪切耦合层合板设计了拉伸-扭转耦合结构。研究表明：自由铺层的拉伸-剪切耦合层合板的屈曲强度以及稳定性要显著弱于标准铺层层合板，但具有更强的耦合效应；随着层数的增加，自由铺层的拉伸-剪切耦合层合板的最大耦合效应逐渐减小。 |
| 关键词: 拉伸-剪切耦合效应 层合板 优化设计 屈曲强度 拉伸-扭转耦合 |
| DOI：10.11887/j.cn.201505019 |
| 投稿日期：2014-11-25 |
| 基金项目:国家自然科学基金资助项目（11472003） |
|
| Optimization design of extension-shear coupled laminates and application in extension-twist coupled structure |
| LI Jin, TANG Guojin |
|
(College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| Focusing on the deficiencies of standard-form laminate with extension shear coupling, such as weak extension-shear coupling, the design method for free-form laminate with extension-shear coupling using the method of optimization design was proposed. Necessary and sufficient material-independent conditions were derived for extension-shear coupled laminates. The stacking sequences of 7-ply to 14-ply free-form laminates with extension-shear coupling were derived. Comparisons were made on buckling strength and robustness of extension-shear coupled laminates. The free-form laminate with extension-shear coupling was used to design structure with extension-twist coupling. Compared to the standard-form laminate, the free-form laminate with extension-shear coupling is worse in buckling strength and robustness, while it’s stronger in coupling. The results also indicate that with an increase in the number of plies, the maximum extension-shear coupling flexibility coefficient of the free-form laminate decreases. |
| Keywords: extension-shear coupling laminate optimization design buckling strength extension-twist coupling |
|
|
