引用本文: | 郑春满,刘相,谢凯,等.应用镁金属化学还原法制备多孔Si/Si-O-C负极材料机理研究[J].国防科技大学学报,2016,38(3):107-111.[点击复制] |
ZHENG Chunman,LIU Xiang,XIE Kai,et al.Mechanism of porous Si/Si-O-C anode material prepared by chemical reduction with magnesium[J].Journal of National University of Defense Technology,2016,38(3):107-111[点击复制] |
|
|
|
本文已被:浏览 8408次 下载 5927次 |
应用镁金属化学还原法制备多孔Si/Si-O-C负极材料机理研究 |
郑春满, 刘相, 谢凯, 韩喻 |
(国防科技大学 航天科学与工程学院, 湖南 长沙 410073)
|
摘要: |
以二乙烯基苯和聚硅氧烷为原料经先驱体转化法制备Si-O-C材料,利用镁金属在惰性气氛保护下高温还原制备多孔的Si/Si-O-C负极材料。利用X射线衍射、能谱分析、元素分析和场发射扫描电镜分析多孔Si/Si-O-C负极材料的组成、结构、形貌,从而研究利用镁金属化学还原法制备多孔Si/Si-O-C负极材料的机理。结果表明,镁金属在还原过程中生成MgO和Mg2SiO4等产物,经HCl洗涤后可形成多孔的Si/Si-O-C负极材料。Si/Si-O-C材料中的单质硅分布于多孔的Si-O-C相中,一定程度上可缓解Si在循环过程中产生的体积效应。利用镁金属还原Si-O-C材料制备多孔Si/Si-O-C材料是一种可行的制备方法。 |
关键词: Si/Si-O-C负极材料 镁金属 还原 机理 |
DOI:10.11887/j.cn.201603018 |
投稿日期:2015-03-30 |
基金项目:湖南省自然科学基金资助项目(10JJ4045);国防科技大学校预研基金资助项目( JC08-01-06) |
|
Mechanism of porous Si/Si-O-C anode material prepared by chemical reduction with magnesium |
ZHENG Chunman, LIU Xiang, XIE Kai, HAN Yu |
(College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China)
|
Abstract: |
Si-O-C material was prepared by a polymer-derived method using copolymer of phenyl-substituted polysiloxane and divinylbenzene as raw materials. The porous Si/Si-O-C anode material was prepared with the chemical reduction of Si-O-C material by magnesium at high temperature under argon atmosphere. The composition, structure, morphology, and formation process of porous Si/Si-O-C anode material were investigated by X-ray diffraction, energy spectrum analysis, elemental analysis and field emission scanning electron microscope. The electrochemical properties of the material were characterized by using the electrochemical test instrument. The research results show that the magnesium will react with oxygen of Si-O-C material and turn into MgO and Mg2SiO4 during the reduction process. When washed with HCl, MgO and Mg2SiO4 react with HCl and turn into MgCl2, which can dissolve in the solution. Then, the porous Si/Si-O-C anode materials are formed. The silicon distribute in the porous Si-O-C material, which can improve the cycle performance of silicon. It can confirms that the material prepared by using magnesium reduction method is a potential material for the lithium-ion battery. |
Keywords: Si/Si-O-C anode material magnesium reduction mechanism |
|
|
|
|
|