| 引用本文: | 刘科,吴文启,唐康华,等.利用实际飞行数据插值的INS/GNSS组合导航仿真轨迹发生器.[J].国防科技大学学报,2018,40(1):132-137.[点击复制] |
| LIU Ke,WU Wenqi,TANG Kanghua,et al.Trajectory generator for INS/GNSS integration simulation through real flight data interpolation[J].Journal of National University of Defense Technology,2018,40(1):132-137[点击复制] |
|
| |
|
|
| 本文已被：浏览 8046次 下载 6711次 |
| 利用实际飞行数据插值的INS/GNSS组合导航仿真轨迹发生器 |
| 刘科, 吴文启, 唐康华, 文坤 |
|
(国防科技大学 智能科学学院， 湖南 长沙 410073)
|
| 摘要: |
| 针对INS/GNSS组合导航仿真中捷联惯导系统陀螺、加速度计信号高精度模拟问题，提出基于实际飞行数据插值的动态轨迹解析生成仿真算法。对转换到地心惯性坐标系中的载体姿态、位置和重力场数据进行关于时间的样条函数插值，得到载体坐标系下陀螺角速率、角增量以及加速度计比力积分增量的高精度分段解析表达式。使生成的陀螺、加速度计信号符合载体运动学和动力学特性，反映杆臂效应影响，同时与经事后处理的实测GNSS伪距、伪距率等数据特征保持一致。提出四元数约束插值算法，其可满足四元数解析插值时范数为1的约束限制条件。基于某实际无人机飞行数据，验证了所提算法的有效性，其完全满足组合导航动态仿真精度要求。该算法也适用于其他高精度高动态导航系统和刚体运动控制仿真中的角运动、线运动传感器信号模拟。 |
| 关键词: INS/GNSS组合导航 捷联惯性导航 动态轨迹解析生成 四元数样条插值 杆臂效应 |
| DOI：10.11887/j.cn.201801020 |
| 投稿日期：2016-11-02 |
| 基金项目:国家重大基础研究子专题资助项目(6132180103-2)；教育部高等学校博士学科点专项科研基金资助项目（20124307110006） |
|
| Trajectory generator for INS/GNSS integration simulation through real flight data interpolation |
| LIU Ke, WU Wenqi, TANG Kanghua, WEN Kun |
|
(College of Artificial Intelligence, National University of Defense Technology, Changsha 410073, China)
|
| Abstract: |
| An analytic dynamic trajectory generating algorithm based on real flight data interpolation was proposed for INS/GNSS integrated navigation simulation, in order to solve the problem of generating high-precision simulated signals of gyros and accelerometers in a strapdown inertial navigation system. Accurate piecewise analytic expressions of angular rates, angular increments and specific force integral increments in body frame were obtained on the basis of the spline function interpolation for the vehicle′s attitude, position and gravity data in the earth centered inertial frame. The simulated signals of gyros and accelerometers were coincident not only with the vehicle′s kinematics and dynamic characteristics, but also with the characteristics of post-processed GNSS′s pseudo-ranges and their rate measurements. The influence of the lever arm effect of an inertial measurement unit was also simulated. A constrained analytic quaternion interpolation algorithm was proposed under the restrictive condition in which the norm of the interpolated quaternion should be 1. Based on the real flight data of an unmanned aerial vehicle, it is proved that the accuracy and the effectiveness of the proposed algorithm can meet the requirements of dynamic simulation of integrated navigation. The algorithm can also be used in other simulations, such as high-precision high-dynamic navigation and rigid body motion control, in which the simulated sensor signals in angular and linear motion are needed. |
| Keywords: INS/GNSS integration navigation strapdown inertial navigation system analytic dynamic trajectory generating quaternion spline interpolation lever arm effect |
|
|
