| 引用本文: | 马松,谭建国,张志伟,等.二次流引射对保形非对称喷管性能的影响.[J].国防科技大学学报,2018,40(6):44-51.[点击复制] |
| MA Song,TAN Jianguo,ZHANG Zhiwei,et al.Influence of secondary flow ejection on the performance of conformal asymmetric nozzle[J].Journal of National University of Defense Technology,2018,40(6):44-51[点击复制] |
|
| |
|
|
| 本文已被：浏览 7746次 下载 5930次 |
| 二次流引射对保形非对称喷管性能的影响 |
| 马松1,2, 谭建国1, 张志伟2, 朱伟1,2, 姜浩2 |
|
(1.国防科技大学 空天科学学院，湖南 长沙 410073;2.沈阳飞机设计研究所，辽宁 沈阳 110035)
|
| 摘要: |
| 发动机与飞机后体结构设计合理与否直接影响发动机的部件匹配和性能。利用三维雷诺平均N S方程和k-ω SST湍流模型对飞翼布局无人机保形非对称喷管在典型飞行状态下开展了内外流流场特性的数值分析，获得了后体尾喷管推力性能和三维流动特征随二次流压力比的变化趋势。结果表明：发动机喷管落压比条件一定的前提下，通过合理优化二次流通道、增大二次流压力比，可以有效改善后体/喷管主流流场特性；当二次流与主流的流量比在0.2%～1.86%内时，后体尾喷管轴向推力系数的变化幅度大约为3%，在一定程度上能够减弱发动机主流的过膨胀程度，减小发动机推力损失，无人机后体尾喷管性能得到显著提高。 |
| 关键词: 非对称喷管 数值分析 流场特性 二次流 落压比 |
| DOI：10.11887/j.cn.201806007 |
| 投稿日期：2017-09-11 |
| 基金项目:国家自然科学基金资助项目（11272351） |
|
| Influence of secondary flow ejection on the performance of conformal asymmetric nozzle |
| MA Song1,2, TAN Jianguo1, ZHANG Zhiwei2, ZHU Wei1,2, JIANG Hao2 |
|
(1.College of Aeronautics and Astronautics, National University of Defense Technology, Changsha 410073,China;2. Shenyang Aircraft Design & Research Institute, Shenyang 110035,China)
|
| Abstract: |
| The reasonability of the structure design of aircraft engine and after-body directly affects the components matching and performance of the engine. The numerical analysis for the internal and external field characteristics of the conformal asymmetric nozzle of flying-wing unmanned aerial vehicle in the typical flight condition was carried out by adopting the 3D Reynolds-averaged N-S equation and k-ωSST turbulence model. The thrust performance of after body nozzle and also the variation trend of the 3D flow characteristics against the blow-down ratio of secondary flow were obtained. The results show that under a fixed blow-down ratio of the engine nozzle, the main flow field characteristics of the after-body nozzle can be effectively improved by reasonably optimizing the secondary flow channel and increasing the blow-down ratio of secondary flow；when the flow rate of secondary flow and main flow is within the range of 0.2% to 1.86%, the changing range of nozzle axial thrust coefficient is about 3%. Overexpansion of the engine′s main flow is weakened to a certain extent and thrust loss of the engine is decreased. Therefore, the blow-down ratio of secondary flow has great influence on the performance of the after-body nozzle of unmanned aerial vehicle. |
| Keywords: asymmetric nozzle numerical analysis field characteristics secondary flow blow down ratio |
|
|
