| 引用本文: | 蒋国庆,陈万华,王元兴.修正的响应面方法优化螺栓法兰连接结构几何参数.[J].国防科技大学学报,2019,41(5):38-42.[点击复制] |
| JIANG Guoqing,CHEN Wanhua,WANG Yuanxing.Optimization of geometrical parameters of bolted flange by modified response surface method[J].Journal of National University of Defense Technology,2019,41(5):38-42[点击复制] |
|
| |
|
|
| 本文已被：浏览 6252次 下载 4944次 |
| 修正的响应面方法优化螺栓法兰连接结构几何参数 |
| 蒋国庆, 陈万华, 王元兴 |
|
(中国空气动力研究与发展中心， 四川 绵阳 621000)
|
| 摘要: |
| 采用响应面法对螺栓法兰连接进行优化设计时，考虑到经典响应面模型的局限性，在获得结构优化参数与响应指标内在联系的基础上，提出了修正响应面模型；设计了数值试验并对比了数值试验值与前述两种响应面模型预测值，结果表明修正响应面模型的预测值不仅误差相对比较均匀，且最大误差绝对值要明显小于经典响应面模型的相应值。采用遗传算法对修正响应面模型进行了以法兰质量最轻为优化目标的参数优化，取得了比较理想的优化结果。 |
| 关键词: 响应面方法 螺栓法兰连接结构 遗传算法 |
| DOI：10.11887/j.cn.201905006 |
| 投稿日期：2018-05-14 |
| 基金项目:国家自然科学基金资助项目（51605476） |
|
| Optimization of geometrical parameters of bolted flange by modified response surface method |
| JIANG Guoqing, CHEN Wanhua, WANG Yuanxing |
|
(China Aerodynamics Research and Development Center, Mianyang 621000, China)
|
| Abstract: |
| In consideration of the limitation of TRSM (typical response surface method), a MRSM (modified response surface method) which was based on the inner connection between optimization parameters and appointed response was put forward. Several numerical experiments were conducted, and the results were compared with the predicted values of both models. The comparative results show that the MRSM′s predicted values are more uniform than TRSM′s and the max error absolute value is smaller than TRSM′s. By using genetic algorithm, the MRSM is optimized whose aim is to minimize the weight of flange and an ideal result is obtained. |
| Keywords: response surface method bolted flange genetic algorithm |
|
|
