| 引用本文: | 邱昕洋,张彦钦,王宏斌.慢刀伺服加工环曲面的刀具路径规划方法.[J].国防科技大学学报,2020,42(3):121-127.[点击复制] |
| QIU Xinyang,ZHANG Yanqin,WANG Hongbin.Tool path planning method for machining toric surface based on slow tool servo technology[J].Journal of National University of Defense Technology,2020,42(3):121-127[点击复制] |
|
| |
|
|
| 本文已被：浏览 6461次 下载 5674次 |
| 慢刀伺服加工环曲面的刀具路径规划方法 |
| 邱昕洋,张彦钦,王宏斌 |
|
(西北农林科技大学 机械与电子工程学院, 陕西 杨凌 712100)
|
| 摘要: |
| 如何规划刀具路径、进而获得高质量的数控加工代码,是应用慢刀伺服技术加工环曲面的关键技术之一。提出了基于等距面规划刀位点轨迹的刀具路径规划方法,推导了外凸环曲面的面形方程及其等距面方程,对比分析了两种导动曲线及两种数据点离散方法,优选了刀具路径规划方案,应用VB.net语言编写了慢刀伺服加工环曲面用数控代码生成软件,在Vericut平台上对数控代码进行了仿真验证,直观地展示了虚拟加工面相对理论曲面的残留区域,仿真结果验证了方法的可行性。结果表明:将外凸环曲面方程中的非一次常数项a变为a+rd,即得到外凸环曲面的等距面方程；所提刀具路径规划方法适用于慢刀伺服加工外凸环曲面；该方法对应用慢刀伺服技术加工其他面型的光学镜面具有借鉴价值。 |
| 关键词: 慢刀伺服 环曲面 刀具路径规划 等距面 加工仿真 |
| DOI：10.11887/j.cn.202003016 |
| 投稿日期：2018-12-14 |
| 基金项目:中央高校基本科研业务费专项资金资助项目(QN2012028,QN2012030)；时栅传感及先进检测技术重庆市重点实验室开放基金资助项目(2013TGS003) |
|
| Tool path planning method for machining toric surface based on slow tool servo technology |
| QIU Xinyang, ZHANG Yanqin, WANG Hongbin |
|
(College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China)
|
| Abstract: |
| How to plan the tool path and obtain high-quality CNC(computer numerical control) code is one of the key techniques for machining the toric surface with slow tool servo technology. A tool path planning method based on equidistant surfaces was proposed. The surface equations of the toric surface and its equidistant surface equations were derived. Two kinds of guiding curves and two discrete methods were compared and analyzed. Optimized scheme of the tool path planning was selected. The NC code generation software for machining toric surface with the slow tool servo technology was developed by using VB.net language. The generated NC code was verified based on the Vericut CNC machining simulation platform. The residual area of the virtual machined surface relative to the theoretical surface was intuitively shown. Simulation results show that the tool path planning method based on equidistant surfaces is feasible. The results show that by changing the non-primary term of the toric surface equation from a to a+rd, its equidistant surface equation can be obtained. The tool path planning method based on equidistant surfaces is suitable for machining convex-toric surface using slow tool servo technology. The proposed method has some reference values for processing optical elements having other surface shapes by slow tool servo technology. |
| Keywords: slow tool servo toric surface tool path planning equidistant surface machining simulation |
|
|
|
|
|
